Zalman S5 Black Medium Tower ATX Case with Glass Panels - Enhanced RGB Lighting Review

After assembling all the components, the case was satisfied. By blowing, 3 * 120 for blowing in and 2 * 120 for blowing out were installed, no critical temperatures were observed.

Cheap and cheerful. Pros below: Normal system. There are not enough stars from the sky, but you can live with that. Has some cons: Well, the stock blowing of course is so-so, a weak C grade. cable management - just darkness. Otherwise, no complaints.

Pros below: Stylish look, side glass and the presence of coolers in the case, by the way, the cooler is silent. Some cons: The backlight broke down in a matter of months and the built-in coolers can’t cope with heat removal (perhaps this is due to the fact that my components get very hot).

And when unpacking! By chance, I broke the fastening of one of the four legs, but there are no complaints about the case for its price tag. All you need is straight arms.

There seems to be a lack of ventilation holes in the front. In any case, the case provides for the installation of several coolers, you can solve the problem of overheating in the following way. The store noticed a scratch on the glass, to which the seller said, "this is a cheap case, what do you want." If so, no complaints) Some pros: The case is beautiful, glows and all that. Cable management is included. Different cons: Despite the huge number of all sorts of holes for convection, the…

I don’t know what is there in terms of ventilation, but the temperatures are normal (two in front / two on top and rear) beautiful, he was fooled and did not correctly understand that there is no address illumination. Glows quite brightly modes with overflows are not very beautiful. I have one color. in short, a cheap garland) Laying cables is not entirely convenient if there are a lot of them, a modular PSU is better for it, there is not enough space in the back, plus this cover is still)

This building was purchased for 3264. I had to install 3 fans because of the almost blank front panel. Accordingly, the system became loud. From the negative, the metal is thin. The previous case was Zalman Z7 plus. The old body is made more thoroughly, although the thinness of the new one does not interfere, nothing rattles or vibrates. I met comments about the complexity of installing power supplies. A standard ATX power supply is included without problems and even a place is left for wiring,

The case is 100% worth it. Has some pros In general, a solid case, excellent RGB lighting, easy installation, a cover on the back wall that covers the wires, very handy, even if you remove the back cover, everything looks neat. I would like to synchronize with the card, but I think it will work With its cons. The second disk on the back wall cannot be installed, the cover that covers the wires interferes. The lower compartment with the PSU is visible, so it is noticeable, if not black, only the

Very good case, acceptable design. I won’t say anything about the distribution of air flows, the temperature suits me with my PC configuration. I recommend And yet, there are 2 color solutions for these cases, and in my personal opinion, the dark one looks more interesting. Its pros: - Decent design (nothing more) - good quality (I'm not an expert, but everything is very well twisted, screwed) - convenient location of mounts for various types of drives - Plenty of space inside, so it's easy to…

This case (in white) was purchased for assembly based on MSI X570-A Pro, R5 3600, Dark Rock 4, GTX1080ti. Initially, it was clear that the ventilation was so-so, but I wanted to believe that it would pull out my config. Yeah, right now :) In stock, it is equipped with 2 fans. In total, I counted 8 seats for valves: 3 on the face, 2 on the bottom, 1 at the back, 2 at the top. The quality of the case materials is average, but already on the verge of a foul, a little more and we slide into China…

I replaced all turntables with sets from deepcool cf120 and cf140. Three on the face, two on top and one on the back blowing, the temperature has not changed much, it's still hot! 10600k and 3060ti are suffocating, but with the front cover open, everything is fine, when the front cover is closed, there is not enough slot on the side and bottom for normal air intake. I ordered a mesh with a filter on magnets to close the hole on the front end, which I want to carefully cut out in size for air…

The cover is very beautiful. The body metal is of good thickness. The glass is excellent. The lighting on the front of the case and the fan on the back are cool. Airflow seems good for my build. This is a Ryzen processor with an RX 560 graphics card and a 500W power supply.

This case is terrible. I suppose you shouldn't expect much for this cheap price point, but when it says it comes with RGB on the front and on the fan, then I expect it. This case doesn't deliver. The RGB doesn't turn on and the fan on the back spins, but the lights on it don't light up either. The case also looks pretty cheap, but it was really nice to put it in. Better to buy an NZXT case or something similar and then just get RGB fans. For just a few dollars on other case options, you can get