๐ Water Pumps, Parts & Accessories
6 Review
The pump should be unplugged once the water is no longer being moved, or pump will run dry. Assembled in the US with foreign and domestic parts. Multi-flo technology allows easy selection of the appropriate discharge for the application. Top discharge is perfect for tight spaces where water removal is needed; window wells, buckets, etc. Side dischargeโฆ
Read more about this product
6 Review
Basic Information: Voltage: DC12V; Power(Max): 60W; Pressure(Max): 0.8Mpa/116PSI; Flow(Max): 5L/min. Easy to install. Two sides 1/2 Inch Male thread. There are two fittings 1/2 Inch female thread to 3/8 Inch hose bard. Working medium: no oil, no strong corrosive, non-acid and alkali, without solid particles of liquid. Totally sealed, high stable pressureโฆ
Read more about this product
6 Review
MAX pressure: 5000PSI; Working pressure: 4300PSI; Max Temperature: 130F(Do please check the pressure and flow of your machine before order!!). Quick Connect Inlet: 1/4"; Nozzle size: 4.0 GPM (1.236mm). Material: rubber + stainless steel. Fast rotate: 30000R/M. Ten times faster than a standard nozzle.
6 Review
Converts manual pumps up to 1/3 HP to automatic operation. 18-foot power cord. Designed to work in water and with limited space. Built to last.
6 Review
Can be used to change the oil in a lawn mower or boat. Can not be used for GAS. Pumps up to 225 GPH. Minimum drill speed 1200 RPM.
6 Review
Complete pre-assembled system including check valves. Easy installation in as little as 15 minutes. 15 inch diameter or larger sump basin & 1.5โ discharge pipe required. Free PumpSpy monitoring & alerts included. PumpSpy remotely monitors primary sump pump & backup pump performance and battery status, 24/7. System & battery tests performed 3X per weekโฆ
Read more about this product
6 Review
1-1/2" or 1-1/4" Slip-on check valve for most sump pumps. Made of strong ABS body and EPDM rubber on both ends to prolong service life. Stainless steel 301 clamps and fasteners for corrasion and rust resistance. Can be installed vertical or horizontal, but vertical would be best. Reducing water noice.
6 Review
โกโกใKindly TipใWhen you start use the pump you must be submerged into the water at a slight angle to allowthe remaining air to escape.โกโก. ๐ฅใ1HP High PowerใProstormer Sump Pump uses 1HP power, which is more efficient than ordinary 3/4HP sump pump; Max 3700 Gallon Per Hour rating tackles any draining job at a fraction of the time. ๐ฅใMulti Outlet Sizesใ3โฆ
Read more about this product
6 Review
Submersible utility water pump can handle material up to 1/2-inch thick without clogging. Removes water within 1/8-inch of surface. Glass reinforced housing prevents rust. Connects to garden hose with 3/4-inch adjustable discharge adapter. 1-year limited warranty.Requires 2 5/8 inch of water to prime.
6 Review
12 VDC, 3.0 GPM, 55 PSI, and 7.5 Amps. Self-priming water pump with internal bypass-low cycling. Operates quietly and thermally protected; Voltage: 12 VDC. This pump can run dry wtihout damage and contains a built-in check valve.
6 Review
Tuf-Tite makes a full line of risers and Accessories for pre-cast applications. 24" Diameter, available in green only.
6 Review
Properties: rated voltage 12V; working voltage 6-15V; rated current 1.2A, maximum flow 600L/H; high lift 5 meters. Size: Small water pump 98 mm (height) * 38 mm (diameter) Outlet outer diameter: 12mm Outlet inner diameter: 9.7mm. Application range: It can be used with slotting machine, cutting machine, rhinestone tools, and can also be used as a waterโฆ
Read more about this product
6 Review
1 HP SHALLOW WELL JET PUMP: Premium 1-HP jet pump is used for supplying fresh water to large homes, farms, and cabins. HEAVY-DUTY CAST IRON CONSTRUCTION: This heavy-duty pump is designed with a 115/230-volt motor with capacitor as well as corrosion and rust-resistant cast iron casing to ensure years of service and reliability. GLASS-FILLED THERMOPLASTICโฆ
Read more about this product
6 Review
Brand New in box. The product ships with all relevant accessories.
6 Review
Reinforced, corrosion-resistant, thermoplastic submersible sewage pump. 1/2 hp; max. Flow rate is 10000 gallons per hour; 7200 gph at 10 ft. Of discharge lift. Combination 2 in. / 3 in. Npt discharge capable of handling up to 2 in. Solids. Piggy-back tether float switch for automatic or manual operation. Bottom suction design passes solids up to 2โฆ
Read more about this product
6 Review
Price For: Each Includes: - Standards: - Enclosure Type: 3R Thermal Unit Code: - For Use With: - Control Relay: - Item: Motor and Pump Control Box Phase: 1 Mounting: Pole or Wall Type: Submersible Motor/Pump HP: 1-1/2 Voltage: 230 Amps: 11.5 Height (In.): 9-5/16 Width (In.): 8 Depth (In.): 5-13/16 Control Box Type: CSCR. Accepts: Up to #2 AWG Wireโฆ
Read more about this product
6 Review
Replacement FLOAT kit. Works with cdu and spf family of pumps. Easy installation. Does not include switch.
6 Review
โใEfficient Utility Pumpใ- High Performance PSC motor with pure copper wire produces 1/6HP output power, it ensures the stronger power conversion but lower power consumption, more energy-saving than others. This item has the ability to lift water up to Max. 16.5ft of vertical height. Max. Flow rate is 1056 gallons per hour at zero feet, 600 gallons perโฆ
Read more about this product
6 Review
โบAUTOMATIC ON/OFF ELECTRIC SUBMERSIBLE WATER PUMPโ Turns the pump on and off by integrated float switch. It has automatic and manual mode for you to use it under different conditions. When you switch to automatic mode, the pump can be left unattended, as long as the pump is plugged in. Residual Water Level with Automatic Control is 3 inch, Residualโฆ
Read more about this product