🔌 E-Car Connection 16-Pin Female Connector OBD2 Fixed Harness - OBDII Plug for Toyota/Honda/Truck Vehicles Review

The world is the same as factory. My tuner didn't work with my factory plug so I replaced it with this one. My tuner works great now.

Easy to remove unnecessary pins, extremely tight connection. I thought it would bend the pins hard. As long as it works well

I have a jeep wrangler 4dr that is always outside as it is open and exposed to the weather, the OBDII port has quite a bit of corrosion and didn't read properly. This connector comes with all wires/pins but I only needed 5, the unused pins are easy to remove and the installation was smooth (make sure you cut and connect one at a time as I used the factory wires in the same color and power had live line). I used heat shrink butt connectors (bought here) to ensure they were waterproof.

I used this OBD connector on my Kia Sedona. I plugged in the Progressive Snapshot Tool and my OBD connector just fell apart in my hands. The year is 2006, so the plastic has become brittle over the years. Replacing it was a hassle because there wasn't room to work and I only had about 2 inches of slack in the wires, but I installed it. I used butt connectors to join the wires and had to cut the side bracket off. Holes and tie it to the current mount but it's solid and looks nice. Also, it works