Create Stunning Art And Home Decor With INCLY'S High Gloss, Bubble-Free Epoxy Resin Kit - Perfect For DIY, Jewelry Making, And More! Review

I acquired this 64 oz INCLY Epoxy Resin to cast resin objects. There are two bottles: 32 ounces of Part A Resin and 32 ounces of Part B Hardener - that are to be mixed by volume, 1:1. The bottles were securely packaged when received. I was very appreciative of the extended instructions that are on the cardboard package, on the bottles, and also on a written paper inside the box. The instructions are clear, concise, and extensive.The product has a very mild odor. The two parts measured and mixed

I bought a kit of cutting serving board molds with IGaiety epoxy resin, which was an amazing first-time experience. As we ran out of resin, so I decided to buy INCY epoxy resin. A big disappointment! I expected the same transparent effect, but it turned out to be milkish, not see-through with millions of microscopic bubbles. We kept the room temperature 70+ degrees, though. DO NOT RECOMMEND!

I really like this resin. It's super easy to use, I love 1:1 ratio resins. Makes it so much easier. Very easy to mix things in, like glitter and pigment. If you're careful with stirring, you won't get a lot of bubbles either! Hardens nicely and leaves a smooth finish!

This is a great 1:1 mixing epoxy that works as advertised - low odor and crystal clear!Bubbles aren't an issue for me as i have a vacuum chamber, but I didn't see any more than usual when stirring/mixing. It's easy to measure out the correct ratio of course, and cure time is decent as well (though I use an oven to speed things up)This set from INCLY is priced competitively with others on Ebay, so I'd definitely recommend grabbing it if you're running low or want a new brand to try!

The first picture I posted is of the resin bottles alone. The second picture I posted may look a little odd, but rarely when I order resin through the mail is there not some type of spillage. These came perfectly sealed and not a drop spilled onto the bottles or the package. I just had to include a picture of this clean box. That’ll being said, this resin is very easy to use as it is a one-to-one ratio. Very happy to recommend this product.

This is my first time working with epoxy resin and so far I’ve been very happy with the way this product has performed. It was very easy to mix up and didn’t have too strong of a smell.The working time is quite long, so I had plenty of time to mix in colors to the exposure.I’ve done two projects with it so far, and both have yielded very good results. I will definitely be using this resin again.

The resin was easy to pour and the smaller tips were nice if you only need a very small and precise amount. They mixed together easily and I had no issues with using my heat gun with it. I warped my mold but the resin held up so that is great!

I like this resin. Easy to mix. Low odor. Cures quickly in warm places. The one thing I don’t like about it is that when it cures it is kind of hazy but other wise it’s a good product.

This was easy to mix and mixed well with mica powder. When I’m mixing it, there minimum bubbles and zero bubbles after I heat it up in the molds.I cant speak for the clearness after its hardened because I’ve used coloring in all the projects I did with this set.It demolds with no issues and I’m happy with them so far.

This resin mixes up fast, it has very few bubbles after mixing it, it cures very clear and quickly. I had no problems at all with it

I ordered this resin because I have tried it before. It's a great resin. The resin arrived clear and not yellowed. It is very easy to work with given the time. It is easy to add glitter and inclusions into this resin. It dries hard and clear.

I made a small end table. I mixed the resin per the instructions, waited a bit for the air bubbles to release and poured it over some olive wood in the mold. It cured in one day and looks great!

You must mix this by hand using an electric mixer will cause too many air bubbles. You have about 45 minutes working time before it starts to thick up. It leveled pretty good though.

These are large containers and last for many projects. Dried to the high gloss we wanted. These were fantastic for my daughters DIY jewelry projects, very low odor, very few air bubbles. We had about 50 min of work time before it hardened. Great product.

Easy one to one ratio. Mild odor but that’s expected with resin. Open the windows and wear protective gear. First think I made were keychains with the right inks it looked like tempered glass. Even without tint it domed and glistened.

Nothing bubble free about it. I finally just threw it away. It also stuck to 3 of my molds that I rnded up ripping while removing the piece. I will not be buying that resin again.