🖨️ 3D Printer Parts & Accessories
3 Review
We uses good steel material to produce them, really great multi functional Tool for 3D Printer. It can be used For Creality all printers block and nozzles and MK8 MK10 V6 Nozzle Heater Block. Different opening mouth is used for different OD nozzle Size, Biggest opening mouth is suitable for all 20mm long heater block like MK8 V6 and Creality CR10 heater…
Read more about this product3 Review
Very High Torque. 65Ncm(92oz.in) holding torque. NEMA 17 bipolar 1.65"x1.65"x2.36" 4-wire. 1.8 deg. step angle(200 steps/rev). Rated current 2.1A & resistance 1.6ohms.
3 Review
Applicability & compatibility: compatible with all 1.75mm E3D V6 Makerbot 3D printer; NTC connector with terminal, easy to intall. Anti-leakage & anti-blocking design: extruder nozzle connect connect with the tube seamless, prevent print material from leaking or blocking. Heat resistant & ventilation: 12V/40W NTC heater, avoid NTC burn and break…
Read more about this product3 Review
- Compatibility : The extruder hot end kit is compatible with almost Creality series printers and MK8 nozzle. hot end are pre-assembled, easy to install. - Fine work : High quality cooling system, aluminum anodizing frosted, more durable wear. Integrated structure makes it easy to disassemble, repair and assembly. - High-quality materials : Made of High…
Read more about this product3 Review
Premium Quality--MK8 nozzles are made of high quality brass material.Heavy duty and provide a long service life.Easy to install and change. Precise Design--3d printer nozzles can prevent print head from leakage effectively and produce consistent prints with smooth and glossy polish.Reduce the resistance from the corners and avoid blocking of the…
Read more about this product3 Review
Durable material: MK8 extruder nozzles are made of hardened tool steel, good abrasion resistance, heat resistance and corrosion resistance, sturdy construction makes them durable to serve you for long time, suitable for 3D printing at high temperature. Good performance: this hardened tool steel nozzle has higher toughness and hardness, not only suitable…
Read more about this product3 Review
BLTouch is an auto leveling sensor for 3D Printers based on open-source. Simple, Smart, & Precise with repeatability is around 0.005mm. It could work with any kinds of bed materials, such as glasses, woods, metals, and so on. Comes with 1m dupont connector extension cable set.
3 Review
High-Quality Fep Film: Heat resistant and durable quality. Size:200 x 140 x 0.15mm. Quantity: 6 PCS Films, 2 PCS in each one package.Perfectly smooth, scratch-free, perfectly cut, chemical resistant, UV stable, and more durable. Wide Compatibility: Fit for Creality LD-002R/Creality LD-002H/ELEGOO Mars/ELEGOO Mars 2 PRO/ELEGOO Mars 2/anycubic…
Read more about this product3 Review
New Creality 3D printer Self Realising Glass Bed - Using a special microporous coating help release prints when the build plate cools, and there is no need to hack at it with the scrapper!. Prints stick firmly to the bed without any glue or hairspray. Just heat the bed to the temp you usually print PLA, PETG, or ABS, and the print will stick. Save time…
Read more about this product3 Review
Size: 235mm x 235mm. Build sheet adheres to the hot bed to help the filament stuck during printing, while also helping remove the printed model afterward. Compatible with ABS, PLA, HIPS, and another filament. Works with all FDM printer models. Single sheet design installs more quickly and with fewer bubbles than tape or films. Durable construction…
Read more about this product3 Review
Total 35 Pcs include: 1pcs Removed Scraper, 1pcs Tube Cutter, 1pcs Pliers, 2pcs Tweezers, 3pcs Cleaning Brushes, 12pcs Clean Up Knives, 15pcs Cleaning Needles. Cleaning Needle: 15 flexible stainless steel needles for gentle maintenance of your nozzles and difficult to reach places such as feed gears. 7 different sizes of cleaning needles can meet all…
Read more about this product3 Review
The Resin or Paint Filter Kit include 100pcs of Disposable Paper Strainer with 1pcs Silicone Resin Funnel(Large). The Resin Strainer is easily used for pouring uncured resin back into bottle, save your money, eco-friendly. The Resin Filter Funnel set could also be used for filtering out the residual or impurities of paint, oil etc. The Silicone Funnel…
Read more about this product3 Review
A PREMIUM CREALITY UPGRADED KITS: A Premium Upgrade Kits for Ender 3 / Ender 3 Pro /Ender 5 /CR10 /CR10S /S5 3D printer; These quickly and easily installed collection of tried and tested upgrades improve the performance and reliability for your 3D Printers. 100% GENUINE CAPRICORN XS BOWDEN TUBING---Capricorn Premium XS Bowden Tubing is enhanced with a…
Read more about this product3 Review
It's a Z-Axis Leadscrew Top Mount for 3D Printer. Apply to: Creality CR-10, Tornado, Ender 3 etc. Material: Aluminum alloy. Color: Black. After-sales guarantee: each defective item can be replacement for free or refund. If any question, please feel free to contact or QA us, we will try our best to service you.
3 Review
10 x PC4-M10 pneumatic male straight quick connector for E3D-V6 long-distance bowden extruder 3D printer. PTFE Tubing Outer Diameter: 4 mm. Thread: 6mm. The upper part(black) can be inserted 4mm PTFE tube and self-locking. Made of high quality stainless steel, oxidation resistant and rust resistant, increase the life. Good fittings and high performance.
3 Review
✔️Removable design, easy to install:)). ✔️With XH2.54 and DuPont Connector, easy for Heated bed or Hotend Extruder. ✔️Temperature sensor 100KΩ accuracy of ± 1%, Total length:1 Meter. ✔️Compatible with Creality CR-10S Pro,CR-X,Ender 3, Ender 3X, Ender-3 Pro, Prusa I3, Anet E10 etc. ✔️Made by WINSINN.
3 Review
✔️Upgrade HT-NTC100K Thermistor: package temperature measurement. Head diameter: 3mm, Head length: 15mm. ✔️The temperature measurement: -50 °C ~ +350 °C, can replace the original K-type thermocouple temperature. Fit for printing high-temperature filament. ✔️Adopts 304 stainless steel, with the internal temperature package to ensure the maximum service…
Read more about this product3 Review
It's 100% Creality Original. Upgrade with Low Friction Capricorn Original PTFE Tubing 63CM. Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less clogging when printing chunky filaments such as some woodfills or ironfills. Lower retraction means time saved every time the…
Read more about this product3 Review
【Package include】: Total 40Pcs printer nozzles for 3D printer; 10Pcs 0.4mm nozzles, 5 Pcs nozzles for each size 0.2mm 0.3mm 0.5mm 0.6mm 0.8mm 1.0mm. 【Printer Nozzle Parameter】: Input diameter: 1.75mm, Nozzle precision: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm, Screw thread: M6, Easy to find your need. 【Durable Material】: Ender 3 printer nozzles are…
Read more about this product3 Review
【Package include】: 10 Pcs cleaning needles, 1 Pcs tweezers and 20 Pcs printer nozzles for 3D printer. 【Brass Nozzle Parameter】: Input diameter: 1.75mm, Nozzle precision: 0.4mm, Screw thread: M6, Hexagon diameter: 6mm. 【Application】: Ender 3 nozzles fit to replace all external M6 thread connection, like Creality CR-10, Makerbot Anet A8, Ender 3, Ender 2…
Read more about this product