💻 Computer Components
6 Review
Power Model:XK-2412-24. Protection: overvoltage overcurrent circuit protection. AC input: AC85-265V (Global common). AC frequency: 50HZ/60HZ. Output voltage: DC 24V.
6 Review
1.ATX 24-pin male to 24-pin female 90 degree power adapter connector for PC gaming. 2.This adapter cable is designed to change the mounting direction of the ATX 24-PIN cable and install the 24-pin power cable from the vertical to the horizontal orientation, which will solve the PSU installation problem for the limited height chassis. 3.The cables…
Read more about this product
6 Review
Upgrade your laptop to SuperSpeed USB 3.0 via any available ExpressCard slot. Hot-Swapping Feature Allows to Connect/Disconnect Devices without Powering Down the System. Provides 2 ports, compatible with all USB 3.0, 2.0, and 1.1 compatible devices. Fully compliant with USB 3.0 revision 1 and Intel xHCI rev 0.96 specifications. USB 3.0 interface (10x…
Read more about this product
6 Review
【Compatibility】NESPi 4 CASE specifically designed for Raspberry Pi 4 Model B (2GB, 4GB, or 8GB). 【Safe Shutdown and Reset, Functional LED power indicator】It will be more safer when shutdown and reset (Scripts are necessary). The Pi 4B indicator is visible after installation. 【SSD CASE(NOT including SSD)】This NESPi 4 Case comes with NES Cartridge style…
Read more about this product
6 Review
Thermal conductivity > 6.5 W/m-k. Thermal resistance 0.0016 k-in/W. Working Temperature: -30/280°c. Each pack includes 1 gram high performance thermal paste/grease. Can be applied for cooling the interface of cooler heatsink and Computer Processor CPU GPU IC Chips, etc.
6 Review
This kit contains power supply components for Arduino, Raspberry Pi that project based on breadboard. Power Adaptor: 12V 1A 12W, can supplying power for project stability. Breadboard: 830 tie-point MB-102 solderless breadboard, size 16.5x5.5x0.85cm. Power Module: MB-102 breadboard DC voltage-stabilized source module, compatible with 5V, 3.3V; Input…
Read more about this product
6 Review
Same specs as factory cables in various lengths and pack sizes. White with cable specs on one side in blue and nothing on the other side. Has blue stiffeners at each end to make installation a breeze. FFC has 15 pins with a 1.0 mm pitch. Check my other listings for this cable in 1 m and 2 m lengths
6 Review
Warranty Terms - Parts - Lifetime. Warranty Terms - Labor - Lifetime. Memory Size - 4GB. Speed - 800MHz. Pin Configuration - 240-pin DIMM
6 Review
Note: Raspberry Pi Board is Not Included. 【Very Easy to Set Up】 Compatible with the latest Raspberry Pi 3B+ Model, Raspberry Pi 3B Model, Raspberry Pi 2B Model. 【Good Cooling Function】 Comes with dual quiet cooling fan, built-in heatsink and thermal tape, which makes your Pi cooler than others. 【High Quality Material】 Updated manufacturing process with…
Read more about this product
6 Review
RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom. Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz. 264KB of SRAM, and 2MB of on-board Flash memory. Castellated module allows soldering direct to carrier boards. USB 1.1 with device and host support. Low-power sleep and dormant modes. Drag-and-drop…
Read more about this product
6 Review
Compatible with all current models of the Raspberry Pi using a 40-pin header. If the dual fan hat board is connected with gpio edge extension board,it can be placed on the side for heat dissipation without affecting the installation and use of the longitudinal extension board. Independent fan control;Independent LED Light control;Pull out the GPIO pin…
Read more about this product
6 Review
Compatibility: blue and yellow, 0.96 inch OLED module is designed to display graphic information and text information directly on your microcontroller project; Compatible with Mega, Raspberry pi, 51 MCU, STIM 32, etc. Product information: resolution is 128 x 64; View angle is more than 160 degrees; Supporting voltage is from 3.3V to 5V DC; Power…
Read more about this product
6 Review
8GB (2x4GB) DDR3 Dual Channel Kit. Speed: 1600MHz. SPD Speed : 1333MHz. Timing: 9-9-9-24. Voltage: 1.5V VDIMM spec ensures compatibility with 2nd generation (Sandy Bridge) Intel Core processor family.Vengeance heat spreader for styling and performance. Intel and AMD Processor platforms. Compatibility - AMD DDR3 Series,Intel Z68,Intel Z77,Intel Z87,Intel…
Read more about this product
6 Review
MSI X570 Gaming Motherboard RenewedProduct CharacteristicsThe MSI X570 Gaming Motherboard Renewed is a high-performance computer internal component that boasts excellent compatibility and functionality. Designed to support 2nd and 3rd Gen AMD Ryzen processors, including Ryzen with Radeon Vega Graphics, this motherboard is the perfect choice for gamers…
Read more about this product
6 Review
Note: The item only supports 3.3V, please don't use 5V!. Model: Esp-01.Compatible with Arduino. Support 3 modes: AP, STA, AP + STA. ESP8266 is a WiFi enabled Microcontroller – Arduino ready. Updated version ESP-01,with stronger signal. Complete and self-contained Wi-Fi networking solution
6 Review
SPI interface, requires minimum GPIO for controlling. 144x168 resolution, high contrast rate, clear displaying. Low power consumption, wide viewing angle, still viewable even under sunlight. Higher refresh rate compared to e-Papers without "ghosting" issue
6 Review
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards(Pi 4 B);Supports SMS, phone call, GPRS, DTMF, HTTP, FTP, MMS, email, etc.;Support GPS, COMPASS, Glonass, LBS base station positioning, omni-positioning. Bluetooth 3.0, supports data transferring through Bluetooth;Onboard USB TO UART converter CP2102 for UART debugging…
Read more about this product
6 Review
STRAIGHT TOUCH COPPER HEATPIPES - Full CPU contact, more efficient heat transference. Large aluminum fins - 43 x 86 mm aluminum fins offer a larger surface area for heat transference. AQ 3 years warranty
6 Review
Size: 120*120*15mm, air volume: 52CFM (MAX), wind pressure: 1.24mm H2O (MAX) speed: 1500RPM±10%, noise ≤24.1DBA, voltage: 12V, current: 0.15A, interface: 4Pin PWM, Light wire interface: 12V 4pin RGB. Light line interface: 12V 4pin RGB, colorful lamp beads, 14 modes including 7 variations. S-FDB bearings have an industrial-grade service life of 20000…
Read more about this product
6 Review
1,This is a breadboardadapter for the popular ESP-01 ESP-01S wifi module. Here is the link to buy esp-01: https://www.amazon.com/dp/B00O34AGSU. 2,This breadboard adapter will help you to make prototyping with ESP-01 ESP-01S wifi module much easier. 3,This breakout offers clear pinout silkprint on top and will nicely fit your prefered breadboard…
Read more about this product