πͺ Cutting Tools
3 Review
High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge. Round shanks allow use with a wide variety of tool holding systems. When runβ¦
Read more about this product
3 Review
Drilling with forstner bits to achieve a flat bottom hole or to start a deep hole turning project like on a larger vase or vessel is essentially impossible with a standard length forstner bit. To remedy this issue we have developed an extra long, heavy duty steel extension that allows you to secure a 3/8 inch shank forstner bit into the end collet. Theβ¦
Read more about this product
3 Review
Withstands high-temperature applications for extended periods of time (up to 1,100 degreeF). Rigid, thick web design adds stability to bit in tough applications. Surface hardened to penetrate tough abrasive materials, Cuts through light gauge metal, high carbon steel, aluminum and alloy steel, cast iron and stainless steel. Available in jobber lengthβ¦
Read more about this product
3 Review
Straight flute reamers should be used in thru-hole applications only. Blades are adjusted by loosening one nut and tightening the other. Reamer expands to the next size. Adjustable blades give the operator the ability to handle multiple hole sizes with a single tool. Square end allows the user to turn the reamer by hand with an adjustable wrench orβ¦
Read more about this product
3 Review
6β hole dozer hole saw. Durable construction for long-lasting use. Includes Plug Jack for increased productivity. Strongest tooth form in the industry. ICE HARDENED for up to 50% longer life than the competition. Matrix II Bi-Metal Teeth for greater durability. Positive Rake Angle for fast cutting. Radiused Tooth Back reduces stress on teeth. Deeperβ¦
Read more about this product
3 Review
Made of forged steel. Size stamped on tool for easy identification. Ball detent. Not for use on impact applications. Made in USA.
3 Review
Withstands high-temperature applications for extended periods of time (up to 1,100 degreeF). Rigid, thick web design adds stability to bit in tough applications. Surface hardened to penetrate tough abrasive materials. Available in jobber length, full shank. Best used for drilling into light-gauge metal, high-carbon steel, aluminum and ally steel, castβ¦
Read more about this product
3 Review
Impact Rated: Featuring the Bosch Impact Tough bit design so the screw driving bits are impact rated and provide 2X longer bit life than standard impact drill bits. Accuracy: These impact bits feature engineered no-skate tips for more accurate starts. Versatile: The Bosch TI9IM drill bit set is designed for heavy gauge, light gauge metal and hardwoodβ¦
Read more about this product
3 Review
Bi-metal type, HSS M42 grade, 82" long, 1/2" wide, 0.025" thick, 14-18 TPI. Perfect for cutting soft ferrous metal only. Suitable for cutting thin pipe tube profiles etc. 10/14TPI, 14/18TPI is variable teeth profile, 24TPI is fixed teeth profile. Suits all bandsaws which use 82" long, 1/2" wide bandsaw blade.
3 Review
Cuts all composite materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
3 Review
Shank 1/2". Complete with fitted case. Carbide inserts and Allen wrench included. Multi-purpose Indexable tools; 7Piece set Includes (A) Right hand 90 degrees, (B)Right hand 93 degrees, (C) Right hand 95 degrees, (D) Right hand 62.5 degrees, (E) Left Hand 95 degrees, (F) External threading, (G) Cut-off tool.
3 Review
β HIGH PERFORMANCE & HEAVY DUTY β Our premium quality ground rod diver adapter by Kelbert gets the job done like no other adapters in the world as it will provide speed and power so you can break through almost anything in your way with ease without any problems. Give us a try because this adapter will save you a lot of time and stress. β HIGHβ¦
Read more about this product
3 Review
Patent Pending tooth set design optimized to remove material faster. Attached arbor and pilot drill included. New side slot increased leverage for faster, easier slug removal. New exterior red coating reduces side wall friction for efficient cutting. Heavy duty .050 side wall for greater stability.
3 Review
βγMaterial And diameter size γ The Bead Drill tools made by Alloy Steel material, high hardness, very durable in use, corrosion resistance and anti-rust. Package include: 6/8/10/12/14/15/16/18/20/22/25mm blade+1pcs shank+ 26pcs cores. βγConcave cutterγ: These quality, C-shaped, cemented carbide cutter drill through any wood with precision.Each ballβ¦
Read more about this product
3 Review
3/4" Diameter X 12" Long Auger Drill Bit with a 3/8" Hex Shank. Made of Carbon Steel. Solid Center Design for extra rigidity while boring. Perfect for drilling into soft and hardwood, MDF, Plywood, Lumber, Railroad Ties, Landscape Timber, Invisible Floating Shelf Bracket Installation, Tree stump boring, Drilling Vigas for building Pergola for up to 10ββ¦
Read more about this product
3 Review
TOOLDO 1/4-Inch shank rabbet router bit with 6 bearings (1/8"γ1/4"γ5/16"γ3/8"γ7/16"γ1/2"). Rabbet router bit set is made of C2 carbide blades, high-quality alloy blade, high finish, long service life. Rabbet router bit set with Interchangeable bearings to cut rabbets of different depths producing smooth cuts on both surfaces by replacing bearingβ¦
Read more about this product
3 Review
γHEAVY DUTY & SOLID CONSTRUCTIONγMade of ultra-fine grain carbide, ensuring high work efficiency with good milling, cutting performance. γHIGH EFFICIENCYγThese Engraving bits have sufficient flexural strength and high abrasion resistance, obtain accuracy and fine finish With sharp edge, which is able for fast engraving that makes high efficiencyβ¦
Read more about this product
3 Review
γHigh-speed Steel Toolγ- Good for general purpose applications, offering combination of hardness and toughness for wear resistance. γUncoated Toolγ- Features just the base substrate without any additional treatment or coatings, suitable for wide ranges of applications. γHand Reamerγ- Reamer can be hand operated by use of wrenches and used for light cutβ¦
Read more about this product
3 Review
This 5 1/2" Hole Saw Drill Bit is designed for wood / plastic cutting. Non-binding clean edge design make the hole saw blade cuts smooth and fast.More than that,the spring on the drill bit is nice because it automatically pushes the disc out of the saw immediately after completing the hole. It is made of M42 BI-Metal and High Speed steel, Durable andβ¦
Read more about this product
3 Review
Metal hole saw has carbide teeth for long life in material. Hole saw kit has an ejection spring for easy plug ejection. Raised shoulder of the hole saw set helps prevent break through. Optimized tooth design for fast drilling speed. Optimized pilot bit for long life in metal.