🔧 Fittings

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

Heavy duty, stainless steel to outlast the elements and harsh wind speeds. Will fit pipes, poles, or hoses at least 3" in diameter, polygonal shapes are OK. Easy to install with secure quick-release mechanism. Each clamp weighs approximately 3oz. Over 100,000+ units sold!.

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

Model : MV522PB. Pipe Thread Diameter : Air Inlet=Air Outlet=11.5mm;Exhaust=8.5mm. Port Size: Air Inlet (P)=1/4" PT;Air Outlet(A B)=1/4" PT;Air Exhaust(R S)=1/8" PT. MAX Pressure: 0.1 - 0.8MPa; Body Size : 35 x 26 x 80mm/ 1.37" x 1.02" x 3.15"(L*W*H). Mushroom Button Diameter : 37.5mm/ 1.5"; Total Size(Approx.) : 36 x 32 x 122mm/ 1.4" x 1.26" x…

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

Pipe Size: 3/4" NPT Thread. Ferrule Size: 50.5mm, and fits 1.5" Tri-clamp. Two fittings are clamped together with a high temp silicone gasket in between. Made of stainless steel 304 for resistance to corrosion and high temperatures. Suitable for use in food, beverage, and dairy applications.

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

✔ [ 7 DIFFERENT SIZES ] - Total 70pcs packed in a plastic box, easy to storage and carry, 10pcs 6-12mm, 10pcs 10-16mm, 10pcs 13-19mm, 10pcs 16-25mm, 10pcs 19-29mm, 10pcs 22-32mm and 10pcs 25-38mm. Enough to use for your spare and replacement. ✔ [ RELIABLE QUALITY ] - Hose clamps are made of premium 304 stainless steel, solid, durable and not easy to…

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

Adapter for connecting pipes or fittings of different types. Fitting connects to schedule 40 PE pipe on one end and has an NPT female connector on the other. PVC for strength and resistance to reactions with acids, gasoline, alcohol, and hydrocarbons. Barbed fitting creates a tight seal on flexible pipe when used with a hose clamp (sold separately)…

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

5/8" Hose ID x 3/8" Male NPT Brass Barb Fitting. 150 PSI maximum working pressure, -40° to 160° Temperature Rating. PLEASE NOTE, 3/8 NPT MEASURES 0.675" OUTSIDE THREAD DIAMETER IN LINEAR INCHES. Backed by EDGE Industrial full manufacturers warranty. NOT DEEMED LEAD FREE. NOT FOR POTABLE WATER

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

Material of Filter Plate: SS304. Filter Plate Connection Size: Tri Clamp 2 Inch. High Pressure Sanitary Fitting with 6mm Holes. Filter Plate Height: 2 Inch

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

Model : 4V210-08; Operation Type : Internally Piloted Acting Type. Type: 2 Position 5 Way; Power Consumption : DC 12V; Operating Pressure: 0.15 ~ 0.8MPa. Position & Way Number : Two-position, Five-way; Female Thread Port Diameter : 11.4mm / 0.448", 8.5mm / 0.334";Joint Pipe Bore : Inlet=Outlet=1/4''. Total Size(Approx) : 110 x 66 x 22mm / 4.33" x 2.6" x…

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

DC 12V Coil Voltage Solenoid Valve,Model: 2W-250-25. Type: 2 Way Normally Closed, Floating Derection: Single; Suitable Medium: Water/Oil/Gas. Thread size: 1" (32mm);Body Size: 64 x 50 x 97mm/2.5"x1.97"x3.8"(L*W*H);Cable Length(Approx.): 18cm. Operation Type: Direct Acting ;Environment Temperature: -5 °C~ +100 °C;Coil Allowable Temperature: 99 °C. Weight…

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

Type:3/8" Od x 1/4" NPT Thread Push to Connect Fittings; Body Style: Female Straight. 1/4 inch Air line Fittings Fluid Admitted: Air, Water (No Freezing). 1/4 Quick Connect fittings Working Pressure:0-1.0mpa | 0-150psi; Proof Pressure:3.0Mpa | 435psi; Negative Pressure:-100Kpa | -29.5 In Hg. 3/8" od Pneumatic tube Fittings Applicable: Pipe PU/ PA/ PE/…

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

.

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

300 series stainless steel band provides maximum corrosion resistance to salt and most chemicals. SAE size 28, clamping range from 1 - 1/4 inches to 2 -1/4 inches (3,33 to 5,72 cm). Ideal for automotive, home maintenance, plumbing, industrial and marine applications. Suitable for virtually any clamping application. Versatile and easy to use and maintain.

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

White fittings that are used in potable water applications only. Intended for pressure use. For use where systems will not exceed 140° F. PVC Schedule 40 Pipe and Pressure Fittings are used in irrigation, underground sprinkler systems, swim pools, outdoor applications and cold water supply lines. MADE IN THE USA: For over a century, Charlotte Pipe has…

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

45-degree street elbow for connecting a male-ended and a female-ended pipe at an angle. 1/4" Female National Pipe Taper (NPT) threads on one end and 1/4" male NPT threads on the other for connecting pipes with different ends. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. 1200 PSI working pressure…

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

Size&Types: Size 1/2", Type 4Way 12pcs. Material & Standard: PVC, SCH 40. Protection: UV Resistant. Widely Application: for Furniture Grade,Greenhouse shed Pipe Fittings, Tent Connection,Build Heavy Duty PVC Furniture and Dog Bed. One year Warranty: If you receive a package that is missing or damaged, please contact our customer service.

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

Coupler connects to tubing on one end and has an NPT male thread connector on the other. 1/2" outer diameter tube,1/2 NPT male thread. Made of stainless steel 304, heavy duty, durable and corrosion resistance. Maximum working pressure of 600 psi. Temperature range from -100 to + 660 degrees °F.

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

Adapter for connecting pipes or hoses of different types. Connects a hose on one end and a female NPT threaded connection on the other. Glass-reinforced polypropylene for rigidity, lightweight, dimensional stability, and resistance to heat, corrosion, most chemicals, and high impact. Integral hex nut for using a wrench to tighten the fitting. Maximum…

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

Imperial single check valve to prevent flow reversal in a liquid piping system. Accepts nylon and polyurethane tube fittings. Made of acetal copolymer plastic for low moisture absorption and high tensile and flexural strength. Working pressure of up to 145 psi. Meets NSF/ANSI standards 14, 51, and 61 for quality assurance.

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

High quality 304 stainless steel, having durable and long service life. Pipe Size: 1/2" NPT Thread. Two fittings are clamped together with a high temp silicone gasket in between. Used for food, beverage, and dairy applications. Suitable for 1.5" Tri Clamp / Clover / Sanitary.

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

DURABLE MATERIAL AND STURDY STRUCTURE: This water float valve is made from high quality engineering plastic ABS and PE (Polyethylene) for corrosion resistance; heavy duty hardware and structure;. HIGH FLOW RATE AND NO LEAK: High flow rate; rubber washer ensures a tight, leak free kit; adjustable arm with over 180 degrees of adjustment range; PVC Screw…