🔧 Fittings
3 Review
What you will get: package comes with 4 pieces threaded bulkheads for rain barrels, water tanks, or aquariums, spigot and so on, bringing convenience to your daily life. Size information: the double threaded bulkhead fittings are 3/4 inch male and 1/2 inch female thread, which are applicable models fitting for most items; Please check the size before…
Read more about this product
3 Review
Adapter for connecting a hose to a male threaded connection of a different diameter. Hose barb on one end and male NPT threads on the other. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Barbed fitting for a tight seal on hoses and NPT threads for a tighter seal than straight threads. These fittings…
Read more about this product
3 Review
【HIGH QUALITY MATERIAL】 Made of 100% stainless steel, these clamps are corrosion resistant and anti-rust. 【SPECIAL DESIGN】 Special cochlear design provides a strong thermal expansion compensation function, which compensates for the dimensional change caused by the change of the hose, so that the pipe is always in a good sealing and fastening state…
Read more about this product
3 Review
Can be used as a tank check valve for small compressors or as a component in pneumatic circuits. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Fluorocarbon O-rings for higher temperature and chemical resistance. Female and male NPT threads for connecting pipes with different ends. Maximum pressure rating…
Read more about this product
3 Review
1/2" Pex Quarter Turn Full Port Brass Stop Repair Water Shut Off Ball Valve Lead Free Barb Crimp Ring Type ASTM standard F1807. Pack 10 pcs 1/2" Pex Lead Free Brass Water Cut off Ball Valve. Size: 1/2"Pex Max Pressure (PSIG):150 Max. temperature: 200°F. Fitting System Compatibility:Crimp/Clamp,1/2" Pex Fittings on Both End. Heavy duty: forged Brass…
Read more about this product
3 Review
HIGH QUALITY - Made of high quality 65Mn Spring Steel. QUANTITY - 80PCS. SIZE - 8 Sizes, 7mm 9mm 10mm 11mm 14mm 16mm 17mm 18mm, each size 10pcs. PACKAGE - Packed in a sturdy convenient case, can be used for a storage box. APPLICATION - Use them on push mower, riding mower and snowmobiles, ideal for vacuum and low-pressure fuel lines etc.
3 Review
【Model】2V025-08 Solenoid Valves(2 Way Normally Closed ). 【Size】DC24V/1/4''NPT(Please air in the direction of the arrow above the product). 【Temperature Range/Pressure Range】 0-140°F;25-116PSI. 【Feature】2v025-08 has high precision pilot head, up to 5 times/second response speed, suitable for a wide range of, responsive, smooth work, high-speed use…
Read more about this product
3 Review
【Product Name】 5 Way 2 Position Hand Pull Valve. 【Size】1/4"NPT 【Working Medium】Air. 【Working Pressure Range】25Psi~116Psi. 【Product Features】Controls Air Flow On or Off. 【Fittings】We provide matching fittings,You can connect directly to your 1/4 "or 6mm tube.
3 Review
★1/4" tube bulkhead connector. ★Fits all water filter systems and RO system. ★Material: Polyethylene Plastic. ★Quantity: 5 pcs. ★Push fit fittings.
3 Review
Heavy wall bulkhead is molded of highest impact resistant PVC eliminating possibility of finding hidden cracks when filling aquarium. Stock color is jet black to match acrylic tank backgrounds. All kits contain: bulkhead fitting, gasket, lock nut. Recommended Hole Size: 1 3/4".
3 Review
90-degree elbow for connecting two tubes at an angle. Flared tube connection on one end and male NPT on the other. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Operating temperature range of -65 to +250 degrees F. Resists mechanical pullout for a more secure connection. These fittings contain lead and…
Read more about this product
3 Review
The bode are Made from the Resin (PBT). Composite Fitting Push to Connect Tube to Tube 1/4" OD X 1/4" OD. Applicable for water (Max Pressure: 50 PSI) and air (Max. Pressure: 284 PSI). Available for water , air and PPS resin body. The sectional dimension of the compact body optimizes as much flow as the tube capacity in proportion.
3 Review
90-degree street elbow for connecting a male-ended and a female-ended pipe at an angle. Female National Pipe Taper (NPT) threads on one end and male NPT threads on the other for connecting pipes with different ends. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Operating temperatures range from -53 to 121…
Read more about this product
3 Review
Please note: NPT Thread Size is a Nominal Pipe Size, and it Does Not represent the actual diameter; 1/4" NPT Male (Actual O.D: 0.540") x 1/4" NPT Female (Actual I.D: 0.440") x 1/4" NPT Female (Actual I.D: 0.440"). Max. Pressure: 1000 PSI WOG; Temperatures range from -65 to 250 F. Constructed from forged brass for a greater structural integrity and…
Read more about this product
3 Review
✅High quality - single ear hose clamps stainless steel made of 100% 304 stainless steel. The 304 stainless steel very sturdy, strong and reliable; salt resistant, anti-rust, anti-corrosion, waterproof, oil-proof, heat resistance, oxidation resistance and mechanical properties. for long-term use. ✅Clamps design - single ear hose clamps are flexible and…
Read more about this product
3 Review
1/4" BSP Female Full Ports One Way Air Check Valve. Pressure Resistance: 150PSI / 1MPa. Operating Temperature Range: -20-60°C. Copper for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Package Contents: 2Pcs x Air Check Valve.
3 Review
Material: Brass. Size:1/2" NPT male x 1/4" NPT female. Operating temperature range of -53 to +121 degrees. Hex bushing for connecting two pipes with different diameters. Brass for corrosion resistance,ductility at high temperatures,and low magnetic permeability.
3 Review
Product CharacteristicsThe KOOTANS Brass Coupler Fitting Quick Connect is a highly versatile and efficient fitting designed for various applications. With a size of 5/16" Hose Barb to 3/8 NPT Male and a quantity of 4pcs per pack, it offers convenience and ease of use. Crafted from CA 360 brass for barstock, this fitting ensures unparalleled quality…
Read more about this product
3 Review
Premium Materials: Winlong hose clamps are all 304 stainless steel ( including band, housing and screw) to provide maximum corrosion resistance to salt and most chemicals. The worm drive hose clamps comply with SAE standards. Winlong stainless steel hose clamps are salt resistant, anti-rust, anti-corrosion, water proof and oil proof; Winlong hose clamps…
Read more about this product