🔧 Fittings
3 Review
Sturdy material: the body of the body is made of quality ABS plastic material, which is featured with good heat resistance and impact resistance of PC resin, not corrode or rust; The float is made of PE material with nice stability; The valve core is made of silicone material which is non-toxic and odorless, safe for you to use. Easy to use: you can…
Read more about this product
3 Review
KIT CONTENT: 4 x 2" Sanitary Fittings, 2 x 2" Clamp, 2 x 2" PTFE Gasket. INSTALLATION LOCATION:Fit for all other homebrew stuff sanitary fittings. EASY TO INSTALL:his Tri Clover Clamp is more easy to install than the flange connection pipe.Easy tighten thumb screw. HIGH QUALITY:Made of stainless steel 304, preventing rust processes and for the whole body…
Read more about this product
3 Review
100 PSI at 180 Degrees F. Teflon seats and EPDM o-rings. For use with tubing size pipe. Meets ANSI / NSF 14 for Plastic Piping System Components.
3 Review
Made of 304 stainless steel, corrosion resistant ductility at high temperatures, and low magnetic permeability. 1" hose barb on both end, could be connect to 1" ID tubing. Temperatures range from -40 to 160 F. Maximum working pressure of 250 psi. 90-degree elbow can change the flow of the tubing in a right L angle.
3 Review
PVC caps offer a quick, easy way to cap pipe ends, test pipes and clean-outs. Compatible with cast iron, plastic, Copper, or schedule 40 steel piping. May be used for non-pressure drain, waste, and vent (dwv) piping systems and sewer systems indoors and outdoors. Conforms to CSA B602, certified and UPC approved, rated for underground use. Flexible…
Read more about this product
3 Review
1.Cap for closing the end of a pipe or fitting,Socket end for connecting to unthreaded pipes or fittings. 2.They are non-toxic, lightweight and easy to install. Installation requires the use of primer and solvent cement。Can be used as a handmade DIY sheif. 3.PVC for corrosion resistance, high strength, and less weight than fittings made from…
Read more about this product
3 Review
Balance pressure between piston and Valve, as well as smaller ball and shorter level can bear high pressure. adjustable arm with over 180 degrees of adjustment range. Stainless Steel Rod for Float Valve, 1/4" thread, 6.3" Length, and 4" PE Float. Works great for water trough, water pump, humidifier, fountain, aquarium, pond, chicken/dog/horse/cattle…
Read more about this product
3 Review
Package Quantity: 10 pack. No tools required,Push fit fittings. Push fit fittings,Quick Connect Fitting 1/4" RO Water System. Standard fitting for water filter systems using 6mm water filter tubing. Applications include RO system beverage dispensing refrigerator ice maker coffee machine etc.
3 Review
Material: High quality brass material with Nickel plating against corrosion. Working Pressure: 200 psi Maximum working pressure. Sealing: Double O-ring ensure 100% sealing in high working pressure. Installation: Easy installation and the tubing also can be removed if needed. Application: Used with ID 3/4 Inch tubing system.
3 Review
No tools required, easy to install, quick connect fitting. Mini quick connect push 1/4-Inch tube OD. Standard fitting for water filter systems and RO Water System using 1/4" water filter tubing. Provides a permanent/removable leak-proof connection. Suitable for water and food applications.
3 Review
How To Shut Off Completely: Use the brass material for ball,which will last for a long time and won’t rust/leak. Unlike other products that use iron, this product’s inside sealer material is Teflon, which is much better than normal plastic. Clean Thread: It’s very important for installing, we have one specific quality inspection procedure for this part…
Read more about this product
3 Review
Will fit any 1-1/4-inch or 1-1/2-inch NPT male or female thread. Made from durable ABS plastic. High quality Nitril-Bruna N seal. Universal design works with multiple applications. Kit includes check valve and two adapters. Water pressure limit: Max 11 psi.
3 Review
Half union for connecting and disconnecting two tubes more easily than with a coupling. 45-degree flare head tube connection on one side and a male NPT connection on the other. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Operating temperature range of -65 to +250 degrees F. Resists mechanical pullout…
Read more about this product
3 Review
DIY AIR SYSTEM - Hromee compressed air outlet kit allow you to design and install your own pressurized air system. No more dragging the compressor and reconnecting air hose. It helps you keep the working room clean and ordered. PU AIR TUBING - Length: 32.8 Feet (10M); Outer Diameter: 1/4” (6.35mm); Inner Diameter: 4.15mm. Max Working Pressure: 120 PSI…
Read more about this product
3 Review
1-1/2 slip x slip unions. Flapper bends over a radius to eliminate sharp 90-degree edges. Capable of vertical or horizontal installation. Slip x slip for 4.3 PSI (10 feet of head) at 130°F. Designed to reduce water hammer.
3 Review
【Product Name】Straight Push-in Connect Fittings. 【Material】Copper and Plastic. 【Size】1/4" Tube OD x 1/4" NPT Thread. 【Maximum Pressure】145Psi【Working Temperature】32~140°F. 【Applicable Tube】PU / PA / PE / PVC.
3 Review
Freshwater backflow preventer. Durable brass construction. 100% lead-free. Check Valve Size: 1/2". Style: MPT x MPT.
3 Review
Push fit fittings,Quick Connect Fitting 1/4" RO Water System. Standard fitting for water filter systems using 6mm water filter tubing. No tools required,Push fit fittings. Easy to use,Mini quick connect push tee 1/4-Inch OD. Applications include RO system beverage dispensing refrigerator ice maker coffee machine etc.
3 Review
Function: locking nut is reversed threaded; The Bulkhead Fitting with 4 mm thick silicon seal gasket that will contour to the shape of the round barrels. Size: 47 mm x 58 mm, 3/4 inch, Material: PVC, Color: gray; Applicable models: universal for most rain barrels, water tanks, ponds, or aquariums. Durable: will not fade, crack, or peel; Durable and…
Read more about this product