🔧 Fittings

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

Coupling for connecting two pipes with the same diameter in a straight run. Slip openings for connecting to male unthreaded pipes or fitting. PVC for corrosion resistance, high strength, and less weight than fittings made from metal. Smooth interior finish for reduced friction and material buildup. Meets specifications ASTM D2466 and D1784 for quality…

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

Fitment: Suitable for most turbo and supeharged applications, replacement for boost control solenoids offered by for Turbosmart, for Cobb Tuning, for AEM, for Autronic, for Haltech, for Grimmspeed and many others. Feature: 5.4W, 25.4ohm coil, Full vacuum to 120 PSI. 3 port solenoid - this is the most common method for controlling boost. Compatible /…

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

CO2 pressure regulator has two valves to independently measure flow rate and remaining CO2 tank contents (CO2 tank sold separately). Valves have dual-scale readings in psi and kg/cm. Needle valve flow control provides precise flow adjustment and measurement. Solenoid valve has 6ft/1.5m power cord. Includes flow regulator, needle valve, electronic…

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

Shape: Hex Nipple (Male x Male). Connection:NPT-NPT.Measurement: 3/4".Length:45mm. Material: 304 Stainless steel. Other size is available too,please check it in our store. Package Include:1 piece x 3/4" Male x 3/4" Male Hex Nipple Stainless Steel 304 Threaded Pipe Fitting NPT.

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

Red brass body. High capacity, heavy duty. Adjusting arm tapped 1/4"-20 thread. Buna-N-disc standard. Not compliant with CA Prop 65 or Safe Water Drinking Act.

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

.

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

Three piece construction - nut, sleeve and body with attached insert. Use with copper, brass, aluminum, or plastic tubing. Standard fittings use short nuts. Easy to disassemble no flaring tool required. Primary uses water, gasoline, oil and vacuum lines. These fittings contain lead and are not allowed by federal law to be installed for potable water use…

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

Connection:1/2" NPT thread adaptor. Ferrule Size: 50.5mm, fits 1.5" Tri-clamp. Stainless steel 304 for resistance to corrosion and high temperatures. This clamp adapter sanitary fitting has a maximum operating pressure rating of 250 pounds per square inch (psi) at 70 degrees F ambient temperature. Suitable for use in food, beverage, and dairy…

2 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

INSTALLS IN SECONDS: No special tools, soldering, crimping, or glue; Just push the adapter to create a watertight union. VERSATILE: SharkBite plumbing fittings fit copper, CPVC, plastic PEX pipe, and HDPE and connect all 3 types in any combination. LEAD-FREE: Made of high-quality forged DZR brass that is lead-free. PREFERRED BY THE PROS: A SharkBite…

2 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

[Material]: Heavy-duty brass,strong and durable,with corrosion resistance,high temperature ductility and low permeability. [Features]: Both ends of this joint have 45-degree flare connection,which has multiple functions and is convenient for installation and disassembly.It is easier to connect and disconnect the two pipes than a coupling. [Package…

2 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

PACKAGE INCLUDES: The stainless hose clamp kit comes with totally 12 pieces hose clamps with adjustable size range from 91 mm to 114 mm, perfect for hose outside diameter 91-114mm / 3.6-4.4 inch. 304 STAINLESS STEEL HOSE CLAMP –The hose clamp is made of high quality and premium heavy duty 304 stainless steel material that are more salt resistant…

2 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

【Sizes】6-7mm, 7-8.7mm, 8.8-10.5mm, 10.3-12.8mm, 12.8-15.3mm, 15.3-18.5mm, 17.8-21.0mm, 20.3-23.5mm, total 8 common sizes. 【Material】High precision single ear hose clamps made of 304 stainless steel, Corrosion-Resistant , will not rust for long-term use. 【Edge Polished Smooth】Cochlear design ensures continuous clamping during temperature changes or…

2 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

✅ Premium material -- 1/2 inch x 1/2 inch NPT brass nipple is made of high quality solid brass, firm and durable, providing high resistance to abrasion and corrosion. Solid brass hose barb can withstand up to 250 °F). ✅ Function -- Brass adapter fittings for connecting hoses, used to connect NPT pipes, brass is corrosion resistant which can apply to…

2 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

1/2" NPT Female Threaded IPS Brass Full Port Water Stop Shut Off Ball Valve ,Heavy Duty Lead Free ,Quarter Turn. Heavy duty: forged Brass ball valve pressure is rated 150 psi wsp for steam and 600 psi woc for water, oil and gas. 1/2" Threaded IPS Lead Free Brass Water Cut off Ball Valve. Size: 1/2" IPS Brass Ball Valve Max Pressure (PSIG):150 Max…

2 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

White fittings that are used in potable water applications only. Intended for pressure use. For use where systems will not exceed 140° F. PVC Schedule 40 Pipe and Pressure Fittings are used in irrigation, underground sprinkler systems, swim pools, outdoor applications and cold water supply lines. MADE IN THE USA: For over a century, Charlotte Pipe has…

2 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

Cap for closing the end of a pipe or fitting. Female NPT threads for connecting to male threaded pipes. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Handles pressures up to 1,200 psi, operating temperature range of -65 to +250 degrees F. Meets SAE, ASME, and ASA technical specifications. These fittings…

2 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

1/2" Hose ID x 1/2" Male NPT Brass 90 Degree Elbow Barb Fitting. 150 PSI maximum working pressure, -40° to 160° Temperature Rating. PLEASE NOTE, 1/2" NPT MEASURES 0.840" OUTSIDE THREAD DIAMETER IN LINEAR INCHES. Backed by EDGE Industrial full manufacturers warranty. NOT DEEMED LEAD FREE. NOT FOR POTABLE WATER.

2 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

Long nipple for connecting two threaded pipes and extending pipe length. 1/8" Male National Pipe Taper (NPT) threads for connecting to 1/8" female threaded pipes. Legines pipe fittings are made of CA360 or CA377 brass, not ordinary copper alloy, and meet SAE standard, have dryseal threads, forgings & extruded. Operating pressure of our fittings is up to…

2 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

Long nipple for connecting two threaded pipes and extending pipe length. Male National Pipe Taper (NPT) threads for connecting to female threaded pipes. Brass for higher corrosion resistance, ductility at high temperatures, and low magnetic permeability. Operating temperatures range from -53 to 121 degrees C (-65 to 250 degrees F). These fittings…

2 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

1/2" Hose ID x 3/8" Male NPT Brass Barb Fitting. 150 PSI maximum working pressure, -40° to 160° Temperature Rating. PLEASE NOTE, 3/8 NPT MEASURES 0.675" OUTSIDE THREAD DIAMETER IN LINEAR INCHES. Backed by EDGE Industrial full manufacturers warranty. NOT DEEMED LEAD FREE. NOT FOR POTABLE WATER