🔧 Fittings
3 Review
Made of 304 stainless steel, strength, resistance and ductility at high temperatures. The reducer hose barb fitting connects on both ends for two different ID hoses. Working temperature range from -40 to +160 degrees F. Commonly used to connect lines for air, water, fuel, oil and inert gases in a quick and simple way. The barbed stems create a tight…
Read more about this product
3 Review
High-quality materials, hundreds of tests, durable, no air leakage. Quick installation, simple and flexible, space-saving, easy to connect tube by one touch. Working Pressure: 0-1.0mpa | 0-150psi. Working Temperature: 0-60°C | 32~140°F. Applicable Tube: Polyurethane and Nylon.
3 Review
1/2" Female NPT Inside, internal hollow straight-through, 1/2" hose bib, faucet, etc. can be installed at both ends. 3/4" male garden hose thread, fit for any standard 3/4" garden hose. Need 1-1/16 to 1-1/8 inch diameter hole to install. Please note: Lead Free Compliant is Not 100% Lead Free, which means that the lead content is less than 0.25%. Good…
Read more about this product
3 Review
TYPE: Standard 1/2 Inch Barbed to 1/2 Inch NPT Male. LIGHTWEIGHT AND DURABLE: Made from high quality polypropylene material. Durable high impact non-corrosive construction. BEST VALUE PACK: Package includes 20 pc * 1/2" Barb x 1/2" NPT Male Connector. TEMPERATURE RANGE: From -4°F to 248°F; Max. Pressure: 100 PSI. Leak-free; easy to use and reliable…
Read more about this product
3 Review
【Product Name】Female Thread Barb Fitting【Material】 Brass. 【Size】3/8" Barb to 1/4" Female NPT. 【Temperature Range】 -40°F to 160°F【Maximum Pressure】150 Psi. 【Premium Material】Brass barbed hose fitting is made of high quality solid brass, firm and durable, providing high resistance to abrasion and corrosion. 【Typical Application】temperature Control Circuits…
Read more about this product
3 Review
Product : Quick Fittings,Model:PC6-02.Package Content : 10 x Quick Fittings. Material : Copper nickel plating+Green rubber; Color : Silver + Black. Thread Size : 1/4" ≈ 13.1mm; Inner Diameter(Black End) : 6mm.Size(Each) : 21 x 15.7mm/ 0.8" x 0.6" (L*W).The specific dimensions are shown in the figure. Product features: high pressure resistant, long…
Read more about this product
3 Review
Environmentally Friendly:Safe and will not release any toxic substance. This Joywayus float valve is a high quality product that is affordable and practical. Strong Tightness:Design with a rubber gasket for better sealing and makes sure no leaking. Wide Application:Widely used in water boiler machine,rice steaming machine,water tank,water tower,toilet…
Read more about this product
3 Review
ENHANCED QUALITY BRASS Makes our One way check valve Resistant to Corrosion and Safe for High Temperatures. CONVENIENTLY DESIGNED TO CONNECT Pipes or Fittings of Different Diameter, Material, and End Type. Our Metal Hose Vacuum Gauge 1/2" float brass Has 0,5 inch Female Threads. RELIABLE FITTING of the Bushing Reducer is Provided by the Well-Machined…
Read more about this product
3 Review
Everflow part Number 600C034-NL. Lead free full port ball valve. Forged Brass construction with Chrome Plated Brass ball. With 3/4 inch solder cups for use with Copper pipes. Upc approved lead free product for 150 psi steam and 600 psi wog.
3 Review
Package include: 2 pcs fittings. This Fitting is 3/8" barb to 3/8" NPT male, suitable for pipe with 3/8" ID. Material: Made of 304 stainless steel, strength and resistance to corrosion. Maximum working pressure of 150 psi;Temperature range from -30 to +150 degrees F. Barbed retracting locks for easy slide-back connecting and disconnecting.
3 Review
Red Plastic-covered lever handle for on/off manual control. The outside thread with sealant for better sealing,Easy Installation in tight working spaces. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Use with brass, steel, and iron pipe; Teflon tape and thread sealant are recommended for threaded joints…
Read more about this product
3 Review
Made of 304 stainless steel, corrosion resistant ductility at high temperatures, and low magnetic permeability. Type: 1/2" Female x 1/2" Female thread, near 1" length (exact 27mm). Operating temperature: range from -65 to 250 degrees F. Widely use: Pipe threads are use widely for pipes and easy to replace and install. Durable: It is a good choice for…
Read more about this product
3 Review
Red brass body. High capacity, heavy duty. Adjusting arm tapped 1/4"-20 thread. Buna-N-disc standard. Not compliant with CA Prop 65 or Safe Water Drinking Act.
3 Review
Made of 304 stainless steel, corrosion resistant ductility at high temperatures, and low magnetic permeability. Type: 1/2" Male x 1/2" Female NPT thread. Operating temperature: range from -65 to 250 degrees F. 90-degree elbow for changing flow direction between pipes. Fitting connects to Male thread on one end and has a Female connector on the other.
3 Review
Nipple for connecting and extending pipes and tubes. Size: NPT1/2(National pipe thread) Length: 2 inch. Material: stainless steel 304, heavy duty, durable and corrosion resistance. Maximum working pressure:290 psi. Working Temperature: -100 to +660 degrees °F.
3 Review
Tee shape with 3 ways to connect and branch three sections of pipe. Made of greater strength stainless steel, using durably. Suitable for Male threaded pipe. Operating temperature: range from -65 to 250 degrees F. Maximum working pressure: 150 pounds per square inch.
3 Review
Material: Made of 304 stainless steel, corrosion resistant ductility at high temperatures, and low magnetic permeability. Size: 1/4”Barb x 1/4”Barb x 1/4”Barb – 6mm Barb x 6mm Barb x 6mm Barb. Fitting connects to hose on all ends. Barbed fitting creates a tight seal on flexible and semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule…
Read more about this product
3 Review
Heavy duty bulkhead is molded of ABS for 1" PVC pipe. Each unit comes with 2 pieces of gasket, NBR rubber gasket. Jet black color to match acrylic tank background or black acrylic paint color. Includes 4 x bulkhead fitting, gasket, lock out. Threaded x Threaded on Both ends.
3 Review
Stainless Steel Hose Clamp, All components are made of Stainless Steel. Suitable for a large number of industries, household appliance & plumbing, industrial, electronic, and automotive applications. A worm gear mechanism is used to precisely adjust the clamp’s diameter and apply sealing pressure. Hose clamps attach hoses to fittings to prevent flow…
Read more about this product
3 Review
Product Size:1/2" Male x 1/2" Male(include 2 item). 90-degree elbow for connecting two pipes or fittings at an angle. Operating temperatures range from -53 to 121 degrees C (-65 to 250 degrees F). Male threads for connecting to female threaded pipes. Forged brass for corrosion resistance, ductility at high temperatures, and durability.