🚰 Hydraulics, Pneumatics & Plumbing
3 Review
Country Of Origin: United States. The Package Length Of The Product Is 6.0 Inches. The Package Width Of The Product Is 4.0 Inches. The Package Height Of The Product Is 1.0 Inches.
3 Review
SAVE TIME: The Hydraulic Grease Fitting SAE Standard 120-Piece Kit – Straight, 90-Degree, 45-Degree Angled Zerk Assortment Set allows you to simply insert lubricant directly into the bearing without having to disassemble or replace the bearing; For restoration and replacing missing or broken grease zerks on your machinery. SIZES: Includes commonly used…
Read more about this product
3 Review
Reducer Adapter: Premium solid brass with thicker wall, more durable than iron and iron galvanized pipe fittings, 1/4" NPT male pipe x 3/8" NPT female pipe. Reducing Hex Nipple: Reducing hex nipple for connecting two threaded pipes with different diameters. Male National Pipe Taper (NPT) threads for connecting to female threaded pipes. Hex Bushing: Has…
Read more about this product
3 Review
Package includes: 25 pieces 1 inch hose clamps. Hose clamp clamping range from 19 to 29mm (3/4 to 1-1/8 inch). 304 Stainless steel hose clamp provides maximum corrosion resistance to salt and most chemicals. Adjustable style hose clamp for a variety of applications for marine, auto, water pipes, fuel lines, etc. Use a screwdriver to tighten or loosen…
Read more about this product
3 Review
High Quality Metric Grease Nipple Fittings Kit. Set Includes 6 Most Used Sizes: M6, M10, Straight, 45-Degree, 90-Degree. Made of Good Quality High-Strength Zinc-Plated Steel and are Hardened to Prevent Wear. Anti-corrosion and Durable. Package Quantity: 120-Pieces, All of Product Will Be Packed in A Sturdy Transparent Plastic Case, Can Be Use for A…
Read more about this product
3 Review
Connects 4 in. S&D pipe to 4 in. S&D pipe & NDS parts that fit 4 in. S&D connections such as Spee-D, 5 in. & 8 in. Pro Series Channel Drain Outlets, Pop-Up Emitters. Connects 4 in. Sewer & Drain (S&D) pipe to 4 in. S&D pipe in non-pressurized drainage and sewer piping systems. Connects 4 in. S&D pipe to select drainage products such as channel drain…
Read more about this product
3 Review
Material : Stainless Steel. Allows removing oxygen sensor. Outer contour: the hexagonal turn-key 17. 18 x 1.5 mm Stainless Steel Hex Socket Plug (mates with 18 x 1.5 mm weld nut. Fit For Custom Exhaust , Headers , Down Pipes or for Adding a extra O2 Sensor for use with a Wideband.
3 Review
Float valves use a rod and float ball attached to a valve shutoff lever to control. Valve Material: Brass; Floating Ball Material: 304 Stainless Steel. Designed with G1/2 inch thread that is normally used, can fit many pipe connection. This float valve has a high-temperature rubber seal, durable to aging for long time use for better sealing and makes…
Read more about this product
3 Review
Molded from high strength chemically inert thermoplastic materials. Multiple Barb design generates maximum gripping and sealing. FDA Compliant material. Nsf-51. Uniprene washer.
3 Review
✅PACKAGE CONTENT: 2Pcs 90 Degree Elbow Pipe Fitting; Size: 3/4". ✅Shape: Elbow (Female x Female ); Outer Diameter: 25mm/ 1"; Operating temperature range of -20°C to 200°C (-4°F to 392°F). ✅HARD 304 STAINLESS STEEL MATERIAL: The elbow is made of high-quality 304 stainless steel, which is durable, strong and resistant to temperature, rust and abrasion…
Read more about this product
3 Review
Durable and elongation rubber construction with black finish. Replacing the seals on the faucet stem will create a better seal and help prevent water leaks. Ease of service, no smearing or retightening. The set comes in re-useable, full-visibility packaging simplifies product selection and storage. Kit includes a variety of the most used o-rings on the…
Read more about this product
3 Review
【PRODUCT FEAUTURE】: Nitrile rubber o-rings are widely used o-ring material in the word,because of good mechanical performance with resistance to water, most basic oils, lubricants and some fuels, prevent leaks in fuel plumbing, machinery, hydraulic. 【MATERIAL】:O-rings made of commercial grade nitrile butadiene rubber ((also known as hydrogenated nitrile…
Read more about this product
3 Review
Size SAE30R6 KX Date; Made in USA. Reinforced with two spiral polyester. Color Black.
3 Review
【Product Name】Cap Plug Fitting. 【Material】Plastic. 【Size】1/4" OD. 【Maximum Pressure】0~145Psi【Working Temperature】32~140°F. 【Applicable Tube】PU / PA / PE / PVC.
3 Review
3/8" DC 12V Solenoid Valve Both power lines can be connected with positive and negative poles. VITON gasket.VITON gasket.VITON gasket. Valve Type:Direct Acting, Wet Armature. Suitable for use with hot or cold water, gas, air, very low viscosity fluids (< 20 cst), oils and hydrocarbons, e.g. gasoline, kerosene, or diesel fuel. Ideal for for…
Read more about this product
3 Review
-Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. -Red Plastic-covered lever handle for fast open or closed operation. -180 Degree operation handle; Double o-ring. -Designed for hydronic heating as well as potable lquid distribution. -Inline valve for connecting two pipes going in the same direction with…
Read more about this product
3 Review
Made of 304 stainless steel, strength, resistance and ductility at high temperatures. The reducer hose barb fitting connects on both ends for two different ID hoses. Working temperature range from -40 to +160 degrees F. Commonly used to connect lines for air, water, fuel, oil and inert gases in a quick and simple way. The barbed stems create a tight…
Read more about this product
3 Review
High-quality materials, hundreds of tests, durable, no air leakage. Quick installation, simple and flexible, space-saving, easy to connect tube by one touch. Working Pressure: 0-1.0mpa | 0-150psi. Working Temperature: 0-60°C | 32~140°F. Applicable Tube: Polyurethane and Nylon.
3 Review
1/2" Female NPT Inside, internal hollow straight-through, 1/2" hose bib, faucet, etc. can be installed at both ends. 3/4" male garden hose thread, fit for any standard 3/4" garden hose. Need 1-1/16 to 1-1/8 inch diameter hole to install. Please note: Lead Free Compliant is Not 100% Lead Free, which means that the lead content is less than 0.25%. Good…
Read more about this product
3 Review
TYPE: Standard 1/2 Inch Barbed to 1/2 Inch NPT Male. LIGHTWEIGHT AND DURABLE: Made from high quality polypropylene material. Durable high impact non-corrosive construction. BEST VALUE PACK: Package includes 20 pc * 1/2" Barb x 1/2" NPT Male Connector. TEMPERATURE RANGE: From -4°F to 248°F; Max. Pressure: 100 PSI. Leak-free; easy to use and reliable…
Read more about this product