🖥️. Single Board Computers
5 Review
0.96" 128X64 OLED LCD Display with IIC/I2C Interface-4PIN. Due to the high resolution of 128 x 64 pixels, the display offers a lot of space to display elements!. Easy connection of the display for Arduino, for Raspberry Pi, for 51 Series, for MSP430 Series, for STM32 / 2, CSR IC, etc. Only through I2C interface via four pins!. 128x64 pixel: please…
Read more about this product
5 Review
Fits Raspberry Pi Zero Version 1.3 & Zero Wireless (not included). High quality materials with stainless steel custom hardware. Includes Heatsink will NOT fit Zero with GPIO Pins see GPIO Case. Designed and Made in Tacoma, WA USA
5 Review
The turbidity sensor for arduino can detect the water quality by measuring the level of turbidity. The principle is to convert the current signal into the voltage output through the circuit. The lower the output voltage is, the higher the turbidity value. Its detection range is 0%-3.5% (0-4550NTU) , with an error range of ±05%F*S. Do not completely…
Read more about this product
5 Review
The MPLAB PICkit 4 In-Circuit Debugger/Programmer allows fast and easy debugging and programming of PIC and dsPIC flash microcontrollers, using the powerful graphical user interface of MPLAB X Integrated Development Environment (IDE), version 4.15. The MPLAB PICkit 4 programs faster than its predecessor PICkit3. Along with a wider target voltage, the…
Read more about this product
5 Review
100 % SATISFACTION GUARANTED: Consistent hole alignment; Easy Pin Insertion; Refund if you are not happy without any reason. NO WORRIES ABOUT CIRCUIT FAILIER: Spend the better part of your time on Creativity and fun DIY rather than debugging the unknown frailer of the poor breadboards. PIN HOLES ARE EXQUISITELY LINING UP: Without any intermittent…
Read more about this product
5 Review
★ Documents: Please get the link from the product description below. ★Note: This item comes unassembled, soldering of headers is required. Lithium battery is not included, battery may be purchased here: https://www.amazon.com/dp/B07CXNQ3ZR. ★Upgrade ESP32 lora development board with 868/915MHz antenna, it supports Sniffer, Station, softAP and Wi-Fi…
Read more about this product
5 Review
Wide Application --- The new 4-layers cluster case is designed for Raspberry Pi clusters. Simple Installation --- The long fixing screws are designed with flat head screws, smooth and easy to install. Better Cooling Effect --- With 120mm 5V RGB LED Fan for better heat dissipation. Good compatibility with Raspberry Pi. Technology Support.
5 Review
The Nano for arduino is a compact board similar to the UNO.The Nano for arduino is a small, complete, and breadboard-friendly board based on the ATmega328P (Arduino Nano 3.x). It has more or less the same functionality of the Arduino Duemilanove, but in a different package. It lacks only a DC power jack, and works with a Mini-B USB cable instead of a…
Read more about this product
5 Review
Natively compatible with all Raspberry Pi A&B series board, camera module and display. 100cm/3.28ft length, 15 Pin 1.0mm Pitch interfaces, longer than the standard Rpi camera cable, especially useful when you don't want to place the camera near the Raspberry Pi. Works great for a “stealth” black look, goes well with 3D printers OctoPrint setup and…
Read more about this product
5 Review
For Raspberry Pi 3B+/3B/2B. Safe Shutdown and Safe Reset;Functional LED power indicator. Functional POWER and RESET buttons. Easy access to the SD-Card and all other ports without opening the case. Package Includes:1x SUPERPi CASE-U (new),1x SD Card Case,1x Screw driver,1x Cooling Fan,1x 3pcs of Heatsinks,1x Flannel Bag,1x Manual
5 Review
🔴 (2 in 1) UNO R3 board and digital logic probe. 🔴 UNO R3 uses ATMEGA328P with A16U2 faster transfer rates,100% compatible with the Arduino IDE. 🔴 TTL, CMOS, LSI, all logic level (3.3V and 5V). 🔴 HIGH, LOW and High Impedance LED indicator light. 🔴 Retractable Probe and Acrylic transparent case
5 Review
User manual: Please get the link from the product description below. The chip model: CP2102. B01IK9GEQG Test Video: https://www.youtube.com/watch?v=Gh_pgqjfeQc; Firmware link: https://github.com/nodemcu/nodemcu-firmware; Data download access to the website: http://www.nodemcu.com; Makerfocus nRF24L01+ and ESP8266 ESP-01 Breadboard Breakout Adapter Board…
Read more about this product
5 Review
BEST CHOICE-The highest cost performance kit for electronic hobbyist and advanced learners to expand Raspberry Pi and Arduino programming. COMPREHENSIVE KIT-More than 300pcs components with breadboard kit and 16 sensor models,this is the most complete kit for Raspberry Pi and Arduino in the market. EASY CARRYING-With a durable large size protective…
Read more about this product
5 Review
Software is Nextion editor, download link: hhttps://nextion.tech/nextion-editor/. Instruction: https://nextion.tech/instruction-set/. Feature: 2.4" TFT 320X240 resistive touch screen display, 4M Flash, 2KByte RAM, 65k colors. What you will get : 1PCS 2.4'' Nextion NX3224T024, 1PCS 4P Cable and 1PCS USB to 2P connector
5 Review
TSL25911FN is a very-high sensitivity light-to-digital converter that transforms light intensity into a digital signal output capable of direct I2C interface. The device combines one broadband photodiode (visible plus infrared) and one infrared-responding photodiode on a single CMOS integrated circuit. Two integrating ADCs convert the photodiode…
Read more about this product
5 Review
IPS screen, 800x480 hardware resolution, configurable by software (up to 1920x1080). Supports popular mini PCs such as Raspberry Pi, Jetson Nano, BB Black, Banana Pi, as well as general desktop computers. When works with Raspberry Pi, supports Raspbian/Ubuntu/Kali/Retropie/WIN10 IOT, driver free; when work as a computer monitor, supports Windows…
Read more about this product
5 Review
Raspberry Pi Camera, supports all Raspberry Pi Boards. Embedded removable IR-CUT filter, eliminating color distortion in the daylight. Provides 3.3V power output. Focal Length: 3.6mm adjustable. Sensor best resolution: 1080p. Supports connecting infrared LED and/or fill flash LED. This camera support to Raspberry Pi 4B/3B/3B+ and Pi 2B B+. This camera…
Read more about this product
5 Review
RICHEN design metal case specially designed for the newest Raspberry Pi 4 Model B computer, only supports the Raspberry Pi 4 Model B board. With all ports and slots match with Raspberry Pi 4B perfectly. also wall mountable, two VESA mounting holes at the bottom of the metal case for hanging on the wall or somewhere you need. DC 5V cooling fan and 3 pcs…
Read more about this product
5 Review
The turbidity sensor for arduino can detect the water quality by measuring the level of turbidity. The principle is to convert the current signal into the voltage output through the circuit. The lower the output voltage is, the higher the turbidity value. Its detection range is 0%-3.5% (0-4550NTU) , with an error range of ±05%F*S. Do not completely…
Read more about this product
5 Review
Higher Resolution & Sensitivity, Compatible With Raspberry Pi Series Boards. The HQ Camera Offers Up To 12.3MP, Along With Nearly 50% Greater Area Per Pixel, Delivering Better Imaging Effect