Header banner
Revain logoHome Page

🖥️. Single Board Computers

All results
canakit raspberry pi 4 8gb starter kit with high-performance 8gb ram logo
Revainrating 5 out of 5

4 Review

Product OverviewThe CanaKit Raspberry Pi 4 8GB Starter Kit - 8GB RAM is a comprehensive package designed for enthusiasts and professionals in the realm of Single Board Computers. This kit includes the powerful Raspberry Pi 4 Model B with an impressive 8GB of RAM, featuring a 1.5GHz 64-bit quad-core CPU. Accompanied by a 32GB Samsung EVO+ Micro SD Card…

Read more about this product
enhanced cooling aluminum armor case for raspberry pi 4 model b by geekworm: optimal passive cooling and improved compatibility logo
Revainrating 5 out of 5

4 Review

Geekworm Raspberry Pi 4 armor case, aluminum alloy metal case specially designed for the Raspberry Pi 4 Computer Model B (1GB/2GB/4GB/8GB). All ports and slots of the aluminum alloy case can match with Raspberry Pi 4 Model B computer perfectly; Add 2pcs 2x20 Female Headers to extend the GPIO pin and insert GPIO cable. Open case design, don't need to…

Read more about this product
🍓 pastall raspberry set - 15cm x 2, 30cm x 2, 50cm x 2 (2 pieces each) logo
Revainrating 5 out of 5

4 Review

The raspberry pi camera cable is 15 Pin and 1.0mm Pitch interfaces. This pi camera ribbon cable high flexibility and ultra-thin, soft, flexible and compact. The pi camera ribbon cable is perfectly compatible for Raspberry Pi camera.Works with all Raspberry Pi boards, Models A+, B+, 2, 3, 3B+, 4B. 2pack 15cm, 2pack 30cm, 2pack 50cm. Our FFC Ribbon…

Read more about this product
📦 6-layer raspberry pi cluster case by geeekpi - transparent stackable enclosure with heatsinks for raspberry pi 4/3/2 model b and raspberry pi 3 model b+ logo
Revainrating 5 out of 5

4 Review

Compatible with Raspberry Pi 4 Model B & Raspberry Pi 3 B+ & Raspberry Pi 3/2 Model B; Raspberry Pi Board Not Included!. Access to all ports and slots of Raspberry Pi, including SD card slot, GPIO port, USB ports, HDMI port and so on. The case includes heatsinks for cooling down your Raspberry Pi better. The stackable case can provide you with an…

Read more about this product
🧪 makeronics solderless 1660 breadboard super kit - experiment & prototype circuits with aluminum back plate + 350 jumper wires + 65 jumpers for arduino projects logo
Revainrating 5 out of 5

4 Review

✔️1660 Test Points In Total(including 2 terminal strips 1260 tie-point and 4 bus strips 400 tie-point) & 3 Binding Posts. ✔️350 U-shape 0.6mm +/- 0.02mm tolerance in diameter pure copper jumper wires + 65 Pack 24AWG Breadboard Solid Multi colors pure(100%) Copper Jumper Wires Kit. ✔️ABS Plastic Housing, Aluminum Back Plate,Metal Contact Clips; Accept…

Read more about this product
waveshare 4.2inch e-ink display module: high-resolution e-paper with embedded controller for raspberry pi, spi interface logo
Revainrating 5 out of 5

4 Review

No backlight, keeps displaying last content for a long time even when power down. Ultra low power consumption, basically power is only required for refreshing. SPI interface, for connecting with controller boards like Raspberry Pi/ /Nucleo, etc. Onboard voltage translator, compatible with 3.3V/5V MCUs. Comes with development resources and manual…

Read more about this product
🔧 biqu rgbduino uno v1.2 jenny development board comparison: upgrade for arduino uno r3 and raspberry pi 4/3b with atmega328p chip and ch340c logo
Revainrating 5 out of 5

4 Review

【Same function as the original Arduino】It great for learning the basics of how sensors and actuators work, and an essential tool for your rapid prototyping needs. 【CHIP UPGRADE】Upgrade the main control chip to ATMEGA328P-AU.And it same as the original arduino pin layout. It compatible with all expansion boards. 【ADDED A 500MA SELF-RECOVERYFUSE】Compared…

Read more about this product
🖨️ high-performance creality ender-5 pro 3d printer in sleek black finish: professional-grade printing at its finest! logo
Revainrating 5 out of 5

4 Review

Print technology: FDM; Print volume: 220 x 220 x 300 mm; Printer size: 552 x 485 x 510 mm; Printer weight: 11.8 kg; Layer thickness: 0.1-0.4 mm; Print error: ± 0.1 mm; File format: STL, OBJ, AMF; Filament thickness: 1.75 mm; Material type: ABS, PLA, TPU, others; Power: 270 W; Nozzle size: 0.4 mm, can be set to 0.2 mm, 0.3 mm (optional); Windows…

Read more about this product
arduino opla iot cloud starter kit: advanced iot kit for seamless connectivity logo
Revainrating 5 out of 5

4 Review

This kit is perfect for both new makers and professional users. Since no soldering is required, getting started is easy with only some basic DIY experience. More advanced users can leverage it to customize and hack their smart applications and devices, with full control of their data and processes. It comes with one MKR Wi-Fi 1010 board, one MKR IoT…

Read more about this product
keyestudio 37 in 1 sensor kit: comprehensive starter kit for arduino mega r3 2560 & raspberry 🧩 pi programming - ideal for kids, teens, and adults in stem education! includes 37 sensors, electronics components, and tutorial logo
Revainrating 5 out of 5

4 Review

This sensor kit comes with 37 basic sensors and modules, which is good for learning basic knowledge about sensors. The main controller is Not Included. It comes with detailed tutorials which include pictures and code and 37 projects, explained step by step. Note we provide arduino tutorials, without Raspberry Pi tutorials. Each module has 3-4 pins…

Read more about this product
🚗 freenove 4wd smart car kit with raspberry pi 4 b 3 b+ b a+, face tracking, line tracking, light tracing, obstacle avoidance, colorful light, ultrasonic, camera, servo, wireless rc logo
Revainrating 5 out of 5

4 Review

This car has multiple functions. (Assembly required. Raspberry Pi and Battery are NOT contained.). Provides detailed tutorial and complete code (Python) -> The download link can be found on the product box. (No paper tutorial.). Compatible models -> Raspberry Pi 4B / 3B+ / 3B / 3A+. (2B / B+ / A+ / Zero 1.3 / Zero W is also compatible but needs extra…

Read more about this product
sunfounder raspberry pi pico basic starter kit: complete tutorials for beginners and software engineers logo
Revainrating 5 out of 5

4 Review

Raspberry Pi Pico is high-performance microcontroller board with flexible digital interfaces. It features the RP2040 with Dual-core ARM Cortex-M0+ processor and support for up to 16MB of off-chip Flash (Raspberry Pi Pico with pre-soldered GPIO pins is included). Raspberry Pi Pico has a wide range of flexible I/O options includes I2C, SPI, uniquely…

Read more about this product
🚀 the ultimate teensy 4.0 (with pins) – unleash limitless possibilities logo
Revainrating 5 out of 5

4 Review

Pre-Soldered Header Pins. 1024K RAM (512K of Tightly Coupled Memory). 2048K Flash (64K Reserved for Recovery & EEPROM Emulation). 2 USB Ports (Both 480 MBit/Sec). 3 CAN Bus (1 with CAN FD), 2 I2S Digital Audio.

🔥 smraza raspberry pi 3 b+ case with fan, heatsinks, 5v 2.5a power supply for raspberry pi 3 model b+(b plus), compatible with raspberry pi 3 model b, pi 2 model b (4-layer case) logo
Revainrating 5 out of 5

4 Review

4 layer Raspberry Pi 3 B+ Case - Specially designed for the 2018 new version Raspberry Pi 3 Model b+, and compatible with Pi 3B 2B (Not include Pi Board). Fans & Heatsinks Cooling - With DC 5V quiet fan and a set of Aluminum heatsinks to keep raspberry pi cool. Easy to access to all GPIO ports - 4 layers Acrylic case allow you use all ports of pi and…

Read more about this product
🔌 makerfocus 4pcs oled display module i2c iic 128x64 0.96 inch ssd1315 yellow blue two-color module with pins for arduino uno r3 stm - high performance and plug-and-play compatibility logo
Revainrating 5 out of 5

4 Review

Application: These serial modules can be used for raspberry Pi 4B/3B+/3B/2B/Zero, Beagle Bone Black,Arduino UNO and Mega, 51 MCU, STIM 32 and so on. Showing graphical & textual information directly on your micro-controller projects. 128 X 64 Pixel: Needn't backlight, the display unit can self-luminous. It has Super High Contrast, bright and crisp dots…

Read more about this product
🔌 electrocookie pcb prototype board for diy arduino soldering projects, gold-plated, double column solderable breadboard for electronics projects (3 pack, red) logo
Revainrating 5 out of 5

4 Review

Useful in transferring breadboarded prototypes to reliable and permanent circuits. Double-column breadboard alignment for versatile prototyping purposes. Adaptable with a variety of MCU boards. Compatible with Arduino Nano, ESP8266, NodeMCU, etc. Gold plated finish to prevent oxidation, and all holes are through-plated for mounting strength. Lead free…

Read more about this product
📡 makerfocus lora sx1262 module 868 915 mhz lorawan iot development board asr6501 mcu 128kb flash ultra low power consumption solar energy powered design with antenna for arduino and intelligent scenarios logo
Revainrating 5 out of 5

4 Review

[ Lora Dev Board ] HTCC-AB01 is a new Dev Board, friendly designed for developers, easy to verify communication solutions.[User Manual]-Please get the link from the product description below. [ Ultra Low Power Design ] 3.5uA in deep sleep. Onboard solar energy management system,can directly connect with a 5.5~7V solar panel; Onboard SH1.25-2 battery…

Read more about this product
💡 high-quality power relay module for raspberry pi 4 3 2 model b b+ a+ logo
Revainrating 5 out of 5

4 Review

Raspberry Pi Expansion Board, Power Relay. The RPi Relay Board gives your Pi the ability to control high voltage/high current devices, easily makes normal home appliances become intelligent. Standard Raspberry Pi 40PIN GPIO extension header, Supports Raspberry Pi A+/B+/2B/3B/3B+/4B and later versions. High quality relays, loads up to 5A 250V AC or 5A…

Read more about this product
🔵 diymall pioled 0.91inch i2c 128x32 ssd1306 oled display module for raspberry pi - pack of 2 blue displays logo
Revainrating 5 out of 5

4 Review

2,This OLED is compatible with all raspberry pi, such as Pi 1/Pi2/Pi3/Pi zero, the display picture is for PiOLED with RPI 0W. 3,This mini screen uses the I2C pins so you have plenty of GPIO connections available for buttons, LEDs, sensors, etc. 4,Comes completely pre-assembled and tested so you don't need to do anything but plug it in and install our…

Read more about this product
🖥️ waveshare compute module industrial iot mini-computer: enhanced 4g connectivity and poe feature for raspberry pi cm3/cm3+ series logo
Revainrating 5 out of 5

4 Review

Compatible with Raspberry Pi CM3 / CM3 Lite / CM3+ / CM3+ Lite. Adopts SIM7600G-H global 4G/3G/2G communication module. 10/100M auto-negotiation Ethernet port, with PoE enabled. Supports 2.4GHz WiFi wireless connection. USB HUB and USB TO UART, allows connecting more USB devices. Provides various industrial isolated interfaces…

Read more about this product
Didn't find what you were looking for?
If you could not find on our platform the desired company or product for which you wanted to write a review, you can create a new page of the company or product and write the first review on it.