Header banner
Revain logoHome Page

🖥️. Single Board Computers

All results
🎮 geeekpi retroflag nespi 4 case kit - raspberry pi 4 4gb board, ssd case, hdmi splitter switch, cooling fan, heatsinks, usb wired game controllers - for raspberry pi 4 model b logo
Revainrating 4.5 out of 5

4 Review

【Compatibility】NESPi 4 CASE specifically designed for Raspberry Pi 4 Model B (2GB, 4GB, or 8GB);Raspberry Pi 4 Model B 4GB Motherboard is Included. 【Safe Shutdown and Reset, Functional LED power indicator】It will be more safer when shutdown and reset (Scripts are necessary). The Pi 4B indicator is visible after installation. 【SSD CASE(NOT including…

Read more about this product
waveshare uv sensor (b) ultraviolet sensor module dc3.3-5v for uv and ambient light intensity detection with i2c output for direct uv index value logo
Revainrating 4.5 out of 5

4 Review

This is an ultraviolet sensor board which will directly output UV index value via the I2C interface. It is compatible with both 3.3V and 5V levels. Integrates Si1145 chip with embedded ADC, detects not only ultraviolet, but also ambient light intensity. Directly output UV index value via the I2C interface, needs no calculation. Supports interrupt output…

Read more about this product
🔍 enhanced green light optical fingerprint reader sensor module for arduino raspberry pi esp8266 esp32 logo
Revainrating 4.5 out of 5

4 Review

Adapter FTDI FT232 Cable link:https://www.amazon.com/dp/B014GZTCC6. Connection with diymall R3 board:pin #2 is IN (GREEN wire),pin #3 is OUT (WHITE wire),5V connect sensor (Red wire),GND connect sensor (Black wire) Connection with diymall 2560 board:pin #10 is IN (GREEN wire),pin #11 is OUT (WHITE wire),5V connect sensor (Red wire),GND connect sensor…

Read more about this product
📸 stemedu esp32-cam: high-performance wifi camera development board with bluetooth for arduino, incorporating 2.4ghz antenna logo
Revainrating 4.5 out of 5

4 Review

Authentic ESP32-CAM from Ai-Thinker. Tutorial link is Document link https://randomnerdtutorials(DOT)com/?s=ESP32-CAM. ESP32 only needs a few peripheral devices to achieve powerful processing performance, reliable security performance, and WiFi Bluetooth function. It is an ideal solution for IoT applications. Support OV2640 and OV7670 cameras, built-in…

Read more about this product
📷 stemedu esp32-cam serial to wifi 5v bluetooth board with ft232rl ftdi usb to ttl serial converter programmer module and 2.4ghz antenna for arduino: all-in-one camera module solution logo
Revainrating 4.5 out of 5

4 Review

ESP32-cam wifi bluetooth camera module designed by Ai-Thinker. The ESP32CAM is a tiny module based on ESP32 chip and OV2640. You can even program the ESP32CAM through the ESP-IDF by installing the ESP32 Core. This ESP32-CAM module can support OV2640 and OV7670 cameras. It built-in flash, but it support TF card as well, the max capacity is 4G. ESP32-CAM…

Read more about this product
raspberry pi screw terminal block breakout hat module - compatible with a+, 3a+, b+, 2b, 3b, 3b+, 4b logo
Revainrating 4.5 out of 5

4 Review

RPi Screw Terminal Block Breakout HAT Module for Raspberry Pi A+ 3A+ B+ 2B 3B 3B+ 4B. The item has been soldered and assembled, with mounting screws, standoffs and labels. Terminal block pitch 3.5mm/0.138", wire size range 26AWG to 16AWG, strip length 5mm, screw M2 steel, pin header and cage copper. FR-4 fiber glass PCB, dual copper layers, pads grid…

Read more about this product
🔌 uniroi raspberry pi rab holder breadboard kit: ultimate circuit board set for arduino, raspberry pi 4b/3b/2b, mega 2560 & more (52 items) logo
Revainrating 4.5 out of 5

4 Review

This 14 in 1 RAB Holder kit is designed by for the Raspberry Pi and Arduino hobbyists, the holder is large enough for a Raspberry Pi 4B/ 3B/ 2B/ 1B+/ Zero/ Zero W, Arduino 328P Control Board or Mega 2560, and a 400 hole or 830 hole Circuit Board breadboard. Including RPi GPIO Breakout Expansion Board and Ribbon Cable, which are special for Raspberry Pi…

Read more about this product
nanopc-t4 compatible 7-inch edp lcd display: hd702e with cap-touch logo
Revainrating 4.5 out of 5

4 Review

The HD702E LCD is a developed eDP LCD with capacitive touch panel. Memory: RAM: Dual-Channel 4GB LPDDR3,Storage: eMMC:16GB, Micro SDx1 for external storage up to 128GB. It works with NanoPC-T4 board under Android and Lubuntu. Its driver is open source. It uses a regular 30-pin receptacle connector(I-PEX-20455-030E). The HD702E has a black bezel with…

Read more about this product
acrylic case with cooling fan for raspberry pi 4 model b/pi 3b+: optimal protection and cooling logo
Revainrating 4.5 out of 5

4 Review

Newest Paspberry Pi Case/Cover for Raspberry Pi 3B+/Raspberry Pi 4 model B. Made of acrylic, the Raspberry Pi case won't block Pi's Wifi or Bluetooth signal. Powerful Raspberry Pi Cooling Fan, Make Sure Your Pi Works Stable. Cooling Design with Fan: Great Heat Dissipation Performance. Notice: Raspberry Pi is Not Included

💡 uctronics raspberry pi 4 poe hat: power over ethernet expansion board for raspberry pi 4 b and 3 b+ logo
Revainrating 4 out of 5

4 Review

For Pi 4 and 3 B+: This PoE HAT can be used to deliver clean and reliable power to the raspberry pi 3 model B+ and raspberry pi 4 model B (not included). Output Power: DC 5V (2.5A Max); Total Power Budget: 12.5W; IEEE 802.3af Compliant. Smaller Size: Nearly half the official size, save more space for your other hardware, can be held in the most case for…

Read more about this product
asus rog phone 5 zs673ks / i005da 5g 128gb dual sim unlocked (gsm only, not compatible with verizon/sprint) - phantom black, tencent games, google play installed logo
Revainrating 4 out of 5

4 Review

Key Features and CharacteristicsThe Asus ROG Phone 5 ZS673KS / I005DA 5G is a powerful and high-performing smartphone designed for gaming enthusiasts and power users. With its factory unlocked status and compatibility with GSM networks like AT&T and T-Mobile, users can experience seamless connectivity and enjoy the freedom to choose their preferred…

Read more about this product
📷 a1 ffcs - high-quality long flex cable for raspberry pi camera - black 1m/3.28ft (bulk pack of 10) logo
Revainrating 4 out of 5

4 Review

Specs are equivalent to the factory cable. Black with cable specs on one side in white and nothing on the other side. Has blue stiffeners at each end to make installation a breeze. FFC has 15 pins with a 1.0 mm pitch. Ships in a protective tube to prevent damage.

waveshare industrial telephoto lens: 16mm focal length, multi field angle, c-mount compatible with raspberry pi hq camera logo
Revainrating 4 out of 5

4 Review

16mm C-Mount Telephoto Lens For Raspberry Pi HQ Camera. 16mm Focal Length High Definition Telephoto Lens, Capturing Every Tiny Details. Fitting The Lens To Raspberry Pi HQ Camera (C-CS Adapter Required). To use with Raspberry Pi Zero, you need to buy an additional Raspberry Pi Zero v1.3 Camera Cable

📺 jnityopt 3.5 inch display for raspberry pi 4 - free driver - hdmi plug & play tft lcd touch screen monitor - 480x320 resolution - supports raspberry pi 4/3/2 b b+/a+/windows 10/8/7 logo
Revainrating 4 out of 5

4 Review

🍓Plug and Play, The touchscreen monitor supports plug and play, 3.5 inch Resistive Touchscreen 480x320 Resolution ,free-driver. 🍓Built-in OSD adjustment function that can easily adjust the brightness/volume/contrast/saturation/language,etc. and supports 3.5mm stereo audio output. 🍓Compatible with the latest Raspberry Pi 4B, BB Black, Banana Pi and other…

Read more about this product
📟 enhance your raspberry pi 3b with flirc kodi edition case logo
Revainrating 4 out of 5

4 Review

Beautiful new design in Jet Black for the Raspberry Pi (Not Included). Official Kodi Merchandise. Made for the new Raspberry Pi 3 B+, works with Raspberry Pi 3, 2 and B+ Models. Built in Heat Sink and comes with a thermal pad and 4 screws. GPIO and all the main connectors are easily accessible through the bottom

makerfocus esp8266 wifi deauth detector v3 with buzzer, rgb led, and 4mb memory - pre-flashed esp8266 esp12n inside - usb led nodemcu wi-fi deauther starter kit dstike logo
Revainrating 4 out of 5

4 Review

User guide: Please get the documentation from the Product guides and documents below: It will tell you What is wifi deauthentication attack, USB attack firmware, the way to RGB LED Test: You have to install Adafuit RGB LED library first. and CP2102 Driver Download link. What is it? It is a device which could detect a WiFi deauthentication attack.It is…

Read more about this product
uctronics starter kit for raspberry pi pico official starter book (get started with micropython on raspberry pi pico) logo
Revainrating 4 out of 5

4 Review

Raspberry Pi Pico is not included. This kit is designed for those already have the Raspberry Pi Pico and want to follow the Official book to learn MicroPython. It includes all other components you need. A high cost performance kit gets you started in learning the robotics, programming and electronics easily. The decent package makes it become a smart…

Read more about this product
🔌 keyestudio 10pcs proto shield for arduino mega r3 2560 - efficient double sided pcb prototype shield logo
Revainrating 4 out of 5

4 Review

Good Value PCB Diy Kit-contains 10 pieces prototype circuit boards and comes with a beautiful box. Perfect size for arduino mega board-seamlessly plug it into the mega board with the pin headers and 4 mounting holes at the corners. High Quality-solid and sturdy glass fiber FR4 material proto boards, thick and double sided. Very Convenient-clear yellow…

Read more about this product
Didn't find what you were looking for?
If you could not find on our platform the desired company or product for which you wanted to write a review, you can create a new page of the company or product and write the first review on it.