🔧 Steering & Suspension Tools
3 Review
Kit is designed to cover the vehicles that require ball joint replacement. Everything required is laid out in this complete 50 piece set. Comprehensive manual includes diagrams with instructions. 70 percent of the OEMs have cars with press in ball joints. Molded storage cases to keep tools organized and easily accessible.
3 Review
【Commonly Applicable】Special design with 4 popular sizes that will fit Some popular bikes include: CB1000RR, CBR600RR, R600, GSXR1000, R1, R6, R1000 bikes, and much more. 【Easy Use】Easily install and remove motorcycles front axles. 【Durable and Well-Made】Very Hard and Well Built-Up.
3 Review
Sizes: 29, 30, 31, 32, 33, 34, 35, 36 and 38mm all packaged in a blow molded case. For removal or installation of axle nuts. For removal or installation of axle nuts. 1/2-Inch drive 6-pt design. Heavy duty chrome moly alloy steel construction. Always check for correct fit before servicing vehicle.
3 Review
Steel Construction. Greater strength. Low profile Zerk fittings. Hardware included. Exclusive threaded preload system.
3 Review
【Commonly Applicable】Special design with 4 popular sizes that will fit Some popular bikes include: CB1000RR, CBR600RR, R600, GSXR1000, R1, R6, R1000 bikes, and much more. 【Easy Use】Easily install and remove motorcycles front axles. Durable and Well-Made】Very Hard and Well Built-Up.
3 Review
Engineered to meet or exceed OE requirements. Superior rubber to steel bonding for durability. High polish chrome steel bearing races. Replacement helps restore vehicle handling.
3 Review
Allows adjustment range from negative 1 1/2 to 1 1/2 degrees.
3 Review
Upgrade kit for OTC 6539. These are the 14 additional adapters required to complete an OTC 6529 Car Ball Joint Master Set when added to the OTC 6539 Truck Ball Joint Adapter Set. Does not include the 7248 C-Frame press.
3 Review
For Depressing Lock Plates on GM and Chrysler Vehicles. Allows Removal of Round Wire Snap Ring That Retains Lock Plate. Reversible Adapter Includes 9/16" - 18 and M14 - 1. 5 Threads. Lifetime.
3 Review
Helps deliver a quieter braking system. Produces smoother pedal travel. Provides longer brake life and performance. Fit type: Universal Fit.
3 Review
For removal and installation of axle nut and automatic transmission tail output shafts. 1/2" drive. 6 point socket. Impact quality. 36mm metric size.
3 Review
Used for 9-3/4 inches Dana 60, 10-1/2 inches Dana 70 and 10-1/2 inches GM axles. Package Dimensions: 8.636 H x 10.921 L x 11.43 W (centimeters). Package Weight: 1.15 pounds. Country of Origin : Taiwan.
3 Review
For separating the ball joint from the spindle support arm on domestic and import front wheel drive vehicles. Adjustable for different size ball joints. Suitable for most cars and light trucks (not intended for use on 3/4 ton or 1 ton trucks). Works on ball joints from 1-1/8” to 2-1/8” and 30 to 56mm in size. Slot is 7/8" wide by 1-1/4" Deep.
3 Review
SPECIFICATIONS: The ARES 15/16-inch ball joint separator is 11-7/8-inch long with a 15/16-inch tapered wedge fork opening, so you can easily replace worn out ball joints and even remove CV drive shafts on FWD vehicles. DESIGN CONSIDERATIONS: Our 15/16-inch ball joint separator is constructed from tempered drop forged steel for enhanced durability and…
Read more about this product
3 Review
Easy to disassemble: Skip the complicated slide hammer puller sets and pry bar tools that can cause damage to your axle, use this CV shaft tool to easily disassemble the CV shaft, saving your time and energy !. Material: CV Axle Removal Tool Set made of high-strength hardened steel, which has high hardness, high strength, with stable performance and…
Read more about this product
3 Review
Mounts onto a hub or brake disc for quick and accurate measurement of camber & castor angles. Also does king pin inclination. On the rear there are two brass adjuster knobs, one to zero the bubble during angle measurement and the other for adjusting the king pin inclination. The ÿCamber gauge has fixed graduation from +5ø to -5ø. The Adjustable castor…
Read more about this product
3 Review
Professional front end service tool set makes it easy to separate pitman arms, tie rods, and ball joints without damage. Total 5 units tools are in different shapes and sizes, can remove even the most stubborn ball joints/ tie rods/ pitman arms. Made of heat-treated alloy steel, with great strength and durability, offering 1 year warranty. All tools…
Read more about this product
3 Review
YSTOOL front end service tool set adopts robust 45# steel construction, with high-strength and deformation resistance features, can stand high intensity extrusion. The stout forcing bolts surface adopts black oxidation treatment to prevent rust, grease the bolts up before using for smooth operation and protect the bolt thread, grease them up after using…
Read more about this product
3 Review
QUALITY CONSTRUCTION - Made with heat-treated chrome vanadium steel for lasting strength and durability. FORK OPENING SIZE - 19.3mm ~ 3/4". TOOL LENGTH: 403mm (16"). LIFETIME WARRANTY - Covers repair and replacement for factory defects. Does not include wear and tear.
3 Review
OTC's Bearing Splitters feature 'knife-like' edges which are easily placed behind the part to secure a gripping surface, even when clearances are extremely limited. When used with an OTC 'Grip-O-Matic' puller, puller jaws grip attachment’s outer edge. When used with a Push-Puller, puller legs are threaded into the attachment’s two tapped holes…
Read more about this product