🔧 Steering & Suspension Tools
4 Review
PROBLEM SOLVER GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life. STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength. GREASEABLE SOCKET -- Reduces corrosion and wear by…
Read more about this product
4 Review
Heavy Duty Drop Forged Chrome Vanadium Steel Construction. 8" Handle For Use With Regular Hammer. 7" Handle With 3/8" Shank For Use With Air Hammer. Both Handles Fit All 3 Forks. Piloted Handles Act As Shock Absorbers To Protect Handle Threads.
4 Review
This puller enables you to remove the front spindle on light-duty 4WD trucks. It's designed for full-size Ford GM International and Jeep pickups with Dana front axles. Also works on Ford Ranger and Bronco II. Fits spindle thread sizes 2 inches-16 1-5/8 inch-16 and 38 mm-1.5. Similar to Ford 204-D020 D93T-3206-A.
4 Review
✅PRACTICAL : The HARDK 3/8” Inch Motorcycles Hex Axle Tool is designed for easy installation, removal, or adjustment of front tire axles on sport and dirt bikes with hexagonal axle holes. ✅VERSATILE: Can be used on an array of bikes; (4) metric hex sizes of 17mm, 19mm, 22mm, and 24mm; Some applications include the CB1000RR, CBR600RR, R600, GSXR1000, R1…
Read more about this product
4 Review
Engineered to meet or exceed OE requirements. Superior rubber to steel bonding for durability. High polish chrome steel bearing races. Replacement helps restore vehicle handling.
4 Review
1.Flushes Out Old Grease and Repacks Bearings with Less Mess. 2.The Handy Packer works on bearings up to 3 1/2" O.D. Grease bearing packing tool measures 4.5 inches (11.5cm) tall, 4.3 inches (11cm) in diameter. 3. To pack a bearing, place the bearing on the piston .The grease stays in the tool cavity, not on your hands. 4.Press down on white handle…
Read more about this product
4 Review
Designed to Compresses the Coil Spring 300mm. Allows for Repairs on Bent Struts Strut Tubes and Damaged Pieces. Includes Forged Construction Acme Threaded Rod and Built-In Safe Lock. Professional Use Only. DO NOT USE IMPACT DRIVER!. Blow Mold Case for Storage, you may receive red or blue case.
4 Review
[Remove CV Axle Joints Effortlessly] Skip the complicated slide hammer puller sets and pry bar tools that can cause damage to your axle, and use the ABN 2 Piece Axle Popper Forks Ball Joint Press Kit to quickly and easily loosen the half shafts from the transaxle on your front wheel vehicles. [Fits your Needs] Solid steel fork design has a 2-inch…
Read more about this product
4 Review
Removes and replaces all sizes of press-fit ball joints found on domestic and import rear wheel drive cars, as well as Ford, GM and Dodge 2 and 4 wheel drive pickups, vans and SUVs. Replacement parts available. Excellent for removal and installation of press-fit parts such as ball joints, U-joints, brake anchor pins, and more on most 2-wheel drive (2WD)…
Read more about this product
4 Review
A complete set of adapters and special large C-frame to remove and install ball joints on most Chrysler/Dodge light-duty trucks, 1999 - 2004 and Jeep Cherokee, Grand Cherokee, Wrangler, and Liberty vehicles, 1997 - 2004. The high clearance, specially designed and produced OTC large C-frame allows for the repair of the most recent vehicles. Large C-frame…
Read more about this product
4 Review
Harm Bal/ crank PULLEY P. Tool solutions for most all situations. Built to exceed tool standards. Designed to help you remove and install press-fit type ball joints without taking the control arm off the vehicle. Kit services: most Domestic and import rear wheel drive vehicles. Remove and install pressed-in Ball Joints found on most vehicles. Remove and…
Read more about this product
4 Review
【Applications】Used to install the front cover for GM LS series engine - 4.8 5.3 5.7 6.0 LS1 LS2 LS3 LS4 LS6 LS7 L99 LS4 LS9 LSA LQ4 LQ9 L76 L92. 【A Must Tool】Perfect for engine builders and mechanic to replace the front or rear main seal for GM LS series engine. Front and rear cover billet alignment tool kit helps align the front and rear engine covers…
Read more about this product
4 Review
NO MORE PICKLE FORKS, NO AIR TOOLS NEEDED, MINIMAL EFFORT: Simply rotate the large forcing screw until the jaws are seated on the ball joint. Then, rotate the small hydraulic forcing screw using a ratchet or wrench until separation. RATED TO 8 TONS: Designed for power and efficiency, the small hydraulic forcing screw displaces fluid in the large forcing…
Read more about this product
4 Review
Package Dimensions: 7.5 L x 3.75 H x 3.75 W (inches). Package Weight : 0.5 pounds. Country of Origin : China. Part Number: K90437.
4 Review
Features solid construction pickle forks in 5 popular sizes. This set is used to remove ball joints, tie rods, pitman arm, and other linkages. One piece design ensures durability, rigidity, and complete transfer of hammering forces. Included are the following sizes to fit most automotive applications: Open Size - 11/16", 15/16", 1-1/16", 1-7/16", and…
Read more about this product
4 Review
Adjustable for Different Size Ball Joints. Max. Opening Range: 1-1/8" to 2-1/8". Steel Construction with Black Oxide Pins. Comes in a Sturdy Blow Mold Case. Fork Opening Measures 7/8".
4 Review
Step design helps keep tool from bouncing back when separating ball joints, steering dampeners, tie rods, pitman arms and other applications. Forks are threaded to interchange with either handle. Forks are heavy-duty heat-treated, alloy steel forgings. Forks are heavy-duty heat-treated, alloy steel forgings; steps can be resharpened if needed. Package…
Read more about this product
4 Review
Multi-use, one tool cover four sizes, 32mm 34mm 35mm 36mm. Made of engineering plastic to protect parts in contact. Light weight of 78g, easy to handle and carry.
4 Review
Separate pitman arms, tie rods, and ball joints on your vehicle. 5 different SAE standard pieces that are universal for cars and light trucks; All forks are threaded to be interchangeable with either handle. Tie rod spreader with 11/16 wedge opening; Ball joint separator with 15/16 jaw opening; Pitman arm wedge with 1-1/8 opening. 7 3⁄4 inch knurled…
Read more about this product
4 Review
【Applicable】Motorcycle front rear wheel axle hex spindle driver socket tool 17/19/22/24mm is designed for easy safely installation, removal, or adjustment of front tire axles on sport and dirt bikes with hexagonal axle holes. Ensures proper fork alignment on the axle to prevent fork binding. Allows the user to single-handedly complete a tire change…
Read more about this product