Header banner
Revain logoHome Page
🧹 denso 160-5512 rear wiper blade - 12 inch logo

🧹 Denso 160-5512 Rear Wiper Blade - 12 Inch Review

3

Β·

Very good

Revainrating 4.5 out of 5Β Β 
RatingΒ 
4.3
🌬️ Windshield Wipers & Washers, πŸ› οΈ Replacement Parts

View on AmazonView on Π―M

Media

(1)
img 1 attached to 🧹 Denso 160-5512 Rear Wiper Blade - 12 Inch

Details

PositionRear
BrandDenso
MaterialGraphite Coated Rubber

Description of 🧹 Denso 160-5512 Rear Wiper Blade - 12 Inch

Weight: 0.25lbs. Single Quantity. No Core Charge Required. Package Dimensions: 60.96 L x 1.905 H x 5.08 W (centimeters).

Reviews

Global ratings 3
  • 5
    2
  • 4
    0
  • 3
    1
  • 2
    0
  • 1
    0

Type of review

Revainrating 5 out of 5

If you own a Fiat, you know what a rear wiper is.

I don't really know why the rear wiper arm should be about as flexible as a welded steel rod, but it is. This makes it impossible to replace the wiper blade. It was very easy and I managed not to break anything! I suggest you go through some instructions before changing the blade, unlike what I did.

Pros
  • Easy to use
Cons
  • Very expensive

Revainrating 3 out of 5

Good product but pay attention to the Revain Fitment guide. .

The wiper itself appears to be of good quality, but despite Revains recommendation, it does not fit a 2013 RAV4. It is 12 inches long and the original is 10 inches. When you install it, the wiper hits the top of the rear window and blocks the wiper arm. Luckily I was able to take the rubber strip out of the new wiper, cut off two inches and put the strip into the old wiper arm. All good, but I ended up paying $10.99 for a 10 inch rubber strip. Revain needs to improve the quality of their…

Pros
  • Confident
Cons
  • Some issues

Revainrating 5 out of 5

Fits 2014 Fiat 500L OEM wiper arm, just remove old insert

This product fits my 2014 Fiat 500L. However, as soon as I received it, I removed the wiper insert and 2 metal strips connected to it and reinstalled them in the OEM wiper arm. After further inspection of the supplied arm, you can remove the stock wiper arm piece (i.e. the piece that actually holds the blade) from the arm that connects to the gear. I did not use this method as the appearance of the new plastic does not match the old plastic and the Denso lever is not 100% the same as the OEM…

Pros
  • Hands free operation
Cons
  • I vaguely remember