💡 Enhance Your Lighting Setup: iJDMTOY (2) 5202 H16 Extension Wire Harness Sockets for Headlights & Fog Lights Retrofit Work Review

B. one of the aftermarket bumpers, they may be required to move the fog lights without connection. Even if you're considering a connection, use it and put the connection in a wire that isn't as important (or expensive) as your factory wiring harness.

The extension worked as described on my 2015 JKU Sport. Looks decent but is a bit pricey at $20 if you could just lengthen the straps on one side. But I got lazy at my age and it worked great. 4 stars due to cost and the fact that it could have been about 3-4 inches longer. There are other similar half price extensions out there but with a different ending so the market seems to be influencing the price of this extension.

This item does not specifically state that it is suitable for Jeep JK fog lights. However, in one of the photos is a photo of a 2015 Jeep JK with a description saying it fits. Didn't suit me. My fog light connectors have two protruding tabs on one of the long sides and a protrusion on one of the short sides. The forks I got from ijdmtoy had a short side rib on the wrong side. I could force the plug to turn on the light, but the wires would be reversed. I ended up just cutting a thick wire and…

This will NOT fit the 2008 Jeep Wrangler factory fog lamp wiring harness at all. The internal connectors on these connectors look like they will mate, but the body diameters are the same as the factory connectors so they will not mate. I even tried both to make sure there weren't different sized ports on each side. If you were interested in seriously modifying them, they might work, but they don't work the way they come. I'll go back and look for something that fits properly.

I have 15 JKUR. I just installed a go rhino BRJ40 front bumper and needed to lengthen the fog lights. Searched everywhere to get extensions as I didn't feel like splicing and such. Called Jeep Mopar Parts and the guy didn't want what I meant. I found these at Revain and expected to have to send them back but they fit PERFECTLY. In fact, I was able to blind it with no problem. I don't know if they've started remaking them after all the other reviews but I wanted to point out that they work well…

I bought these with the intention of cutting off one end. My aftermarket bumper on my 13 JKUR has room for 4 headlights that are not round OEM fog lights. I wanted to hook up two of these as fog lights, but they didn't have a fog light connector. I also didn't want to cut the stock fog light connector off the wiring harness. So I bought them, cut off the end that connects to the light and screwed my lights onto it instead. I used the remaining end to connect it to the wire harness. The…