Review on 📺 NB North Bayou P7: Ultra-Sturdy Full Motion TV Wall Mount for 45”-75 inch Flat Screens - Swivel and Articulating Bracket with 100 lbs Load Capacity - VESA Compatible 200x200 Upto 600x400mm by Krisha Codm ᠌

My TV is 75 inches, weight 32 kg, VESA 300x300 mm. Complete self-tapping screws with plastic plugs look good, but I was careful not to use them, still 32 kg. Anchors work best for pull-out resistance, so for the top row I used anchors with a nut - size 10x60mm, if anyone is interested. After tightening the nuts until it stops, hold the bracket tightly. On the bolted bracket, he pushed the bars to the stop, hung on them and swayed with his entire weight of 70 kg - they hold him without even moving. But the TV mount itself to the bracket is somehow completely frivolous. The tilt back and forth is adjustable and fixed with a pair of nuts with plastic (!) washers for some reason, tightened these nuts and the plastic began to squeeze out from under them. Strange decision. I hung up the TV, and just let it go, as it immediately leaned forward 2-3 degrees under its own weight - the mount is not fixed. Turn (tilt) left-right is also fixed and regulated by a pair of frail bolts, I did not even tighten them all the way, for fear of simply stripping the thread. As a result, the TV is not very stable - not in the sense that it can break off the bracket and fall, no. And the fact that it is poorly fixed in the very node of the docking of the TV with the bracket. It won’t collapse, of course, but it’s better not to touch it once again - then you will have to align it horizontally again. Here is such a story. My opinion - the bracket is excellent, but for TVs weighing up to 20 kg. Well, maybe up to 25 kg. For heavy TVs, it is somehow not very good - it performs its functions, of course, but it could have been better.