Review on City scooter Micro Scooter White, white by Czesawa ledziewska ᠌

: After a couple of years of riding, especially if you're closer to 100 or ride aggressively, the bolts that hold the folding assembly to the deck are likely to get their heads blown off (these bolts are surprisingly thin, plus they're not through bolts - just 4 independent short ones). Drilling out the remains of heavy-duty steel bolts from a soft aluminum (!) Part is another task. However, the part itself is likely to crack in front by that time. You have to give credit to Mikram - even with a crack in a key node and without a couple of load-bearing bolts, you will not soon notice that something is wrong. But the replacement and repair of all this in the complete absence of spare parts is a topic for an amateur. From what you will immediately notice: In the rain, additional mudguards are required - I glued them from a wide transparent adhesive tape on both wings. Otherwise, one stream of water will come exactly to the knee of the supporting leg, the other - exactly under. Apparently, in Switzerland there are no puddles on the sidewalks, as a phenomenon. The folding mechanism has a tight backlash of several degrees, no matter how you tighten the eccentric, there will be a backlash. This does not interfere with riding, even in extreme mode, but still the Micra does not have absolute rigidity. The brake wing can get hot from friction because it's aluminum. Actual for those who like to ride on hills with a passenger or one weighs over a hundred.