Review on 🦊 Fox Performance Series 983-02-070 Acts Stabilizer by Matthew Mrspeach

I prematurely replaced a Fox Performance 2.0 steering stabilizer with an ATS. I couldn't be happier. I adjusted the settings midway and the bar rebound feels great in both directions and is smoother than my previous stabilizer. I couldn't find any lateral pull either. I have a 2" Mopar lift with 35s on a 2016 JK. I had no issues with the release either. with the Synergy steering stabilizer travel mount. Installation was very quick as I had already removed the stock tie rod clamp. with two large ones Wrenches You will need a torque wrench rated at 12 ft-lbs (tie rod clamp, 3/16" hex head screws) and 60 ft-lbs on the stabilizer bar side of the Fox linkage travel bolt. Note The OEM steering link bolt/nut is 125 ft.lb. Fox also recommended blue Loctite for the tie rod pinch bolts.I got good customer service from Fox when I called them about installing shocks which I bought at the same time.It was an expensive item but I... I'm very happy with the purchase and the performance so far I'm halfway there.