Review on Toilet Master Designed Replacement Cleaners by Rolando Munoz

This will be a detailed review of how the gasket on the large toilet was replaced. The contractor put it in there and smeared the wax and before I started the bottom of the toilet was smeared with sealant and I had a feeling it wasn't going to be that easy and I was right. In addition, it is very cramped, so that the help of two people is not possible. I also ordered the Fluidmaster 7530P8 Better Than Wax Universal Toilet Gasket, which is a wax-free toilet gasket instead of a wax one, and that worked too. I had to remove the sealant, loosen the screws holding the bowl in place, and loosen the bowl completely. The wheels on the lift were a little weak and the support was bent. I was able to straighten it out as instructed and was able to complete the project, twisting was the only problem with the lifter. Remember the toilet is big. After I was done I added a 1/8" x 1.1/4" wide x 18" long steel elbow on either side and screwed them in between the wheels for support. So next time the lifting job should be absolutely perfect and be simple.However, working with a lift was easier as the toilet was larger than a normal toilet and the lift would probably have cost more if it had an extra support as steel is very expensive.