Review on WYMECT Charger Socket Waterproof Outlet by Kofi Wills

If you look at my attached photos you will see that your van has these USB holders. They are terrible I know! If you remove the old ones you will find that they are connected to a larger/thicker set of (in my case) white wires. I simply cut off the black and red, snipped the main wires, twisted a new set and crimped the same clear cap over the assembly and then wrapped some electrical tape around it. To install them, since I couldn't find any matching panels, I took a blank black outlet cover and drilled a hole in the middle. I used a ring to tighten them onto the board and then used standard screws to install them into the original hole. The depth is very tight, but it works.