Review on 💧 Cloroxx 59032CLX Sink to Clear Flocculent: A Highly Effective 1-Quart Solution for Clearing Sinks by Mark Young

If you can't clean muddy water, this will help if used correctly. I use this every year. My pool is not screened and I get a lot of leaves, pollen, etc. If you have a cartridge filter you must remove it or it will permanently clog it. This keeps all the extra fine particles that would otherwise get through the filter and sink to the bottom. Follow these steps and it will work perfectly1. Adjust the chemicals, he prefers a slightly higher pH, but I've used it below the 7.5 recommended on the bottle with good results. Add a good dose of chlorine to the water a few days beforehand to ensure all algae are dead. REMOVE filter or set bypass mode3. Turn on the pump and put the flakes in the skimmer4. let her in of 2 hours I usually try 3-45. TURN OFF the pump and leave the water alone for 10-12 hours. Do not enter or swim in the pool6. By now you should have a pile of garbage at the bottom of the pool7. Suck all the things on the bottom you need to do slowly, they are very thin and easy to disturb8. Put the filter back in place and enjoy fresh, clean pool water