Review on 📺 101AV Full Motion TV Wall Mount Bracket: Tilt, Swivel, & Hold up to 33lb (15Kg) for 10"-24" LCD LED Plasma TVs - VESA 100mm x 100mm by Savoeun Ramirez

This is a fairly well made product that is quite capable of holding a TV or monitor. The tilt angle is adjustable, which is very convenient. Be sure to get a good grip on the 2x4 mounting screws in the wall. bracket on the back of the TV into the bracket. Whatever genius decides you need 3 washers that aren't held in place by anything when trying to fit the bracket on the back of the TV into the socket on the bracket should find another job. I had to glue them in place to get the thing back together. This left me with no way of removing the tape after the pieces were together. You must align the bracket in the arm to insert the screw through the mounting holes. I had to use an ice pick to smash through the strap holding the washers in place and then line up the holes so the bolt would fit through the holes in the bracket and bracket. I've seen some mounting blocks where the bracket simply plugs into the back of the TV and snaps into the receiver on the bracket. without having to mess around with equipment to install the TV. Another problem is that the TV wobbles back and forth too easily, even when everything is as tight as possible. In general, everything is fine, but there may be better solutions. there.