Review on 🚗 Husky Liners 59001: Custom Rear Mud Guards for 2011-19 Dodge Durango - Black - Find the Perfect Fit! by David Lusk

I bought these for the new 2016 Durango R/T. Rear - 58001, Front - 59001. Installation is very simple: remove the chassis mounting plate clip aligned with the top hole in the cover and the bottom mounting screw. The bezel latch on my car was nothing like the latch on the front of the car. The front ones were reusable, where you could use a pocket knife to pull out the center and then take the clip out of the hole, the rear one was a disposable type, like a plastic rivet, so it was better to just grab it with a pair of pliers and pull it out of here. I put some masking tape on top of the paint and used a panel clamp tool to pry it out just enough so I could pick it up and work it out. You don't have to worry about the paint, there's plastic in there and the valve closes everything when it's on. After the plastic rivet plate retainer is removed you can install the body retainer nut (which will be tightened with the screw from the kit) to the top hole, lift the cover onto the car and fit the screw that came with the valve and you will use the factory screw for the bottom hole again. I found that I had to come out from under the car on one side and push in to get the bottom bolt to hook and tighten. After installation they looked great, they are very sturdy and at a great price.