Review on 🔧 Dorman 749-542 Front Driver Side Window Regulator for Ford/Lincoln Models: Unmatched Quality and Precision by Uriel Arocha

You will need to remove all the screws from the plastic housing that is already in your door and screw them all to it. I must have misread the product description as I thought it came with a new Bosch motor. I had to do this operation about 5 times so that after installation the crack at the window stops. Now it works great. Time will tell about the quality. Deinitialization Procedure 1. Start with the ignition key in the RUN position and open a front door. 2. NOTICE. Steps 2 and 3 must be completed within 8 seconds. Turn the ignition key from the OFF position to the RUN position 5 times. Initializing the Window Motor WARNING: Keep objects and body parts away from the glass window during initialization. During the initialization process, the glass panel closes with great force and cannot see objects in its path. Failure to follow this instruction could result in serious injury. 4. Start with the ignition key in the OFF position and the LF/RF door open. 5. Turn the ignition key to the ON position. 6. Activate and hold the one-touch window down control switch (second detent) until the window glass stops at the bottom of its travel for 2 seconds and release the switch. 7.NOTE. power window switch or ignition switch. Activate and hold the power window control switch (non-stop) with one touch (second lock) in the UP position until the window glass stops in the UP position for 2 seconds, then release the switch.8. Verify that the window is working properly by performing the one touch up and one touch down functions. If the window does not work properly, carefully repeat this process.