Review on 🔧 Creality Original Intelligent Compatible Upgrade by Charles Quinones

I really like the JyersUI firmware I installed on my Ender 3 V2 printer. Since the V2 is basically an Ender 3 Pro with adjustable axis pulleys for the X and Y axes and has this screen instead of the blue and white monochrome digital display, I decided to take the opportunity to see if I could buy this V2 Getting screen might work. works for me with JyersUI firmware. The switch was successful and now my Ender 3 looks and works almost the same as my Ender 3 V2 printer. I am currently awaiting X and Y adjustable pulleys from Aliexpress and once they arrive I will have the exact same functionality. Having not seen any information on whether this is possible for the Ender 3 Pro, I knew I had to write a review for this screen and add that information. Caveat: Make sure you have a Creality 4.2.x 32-bit motherboard before attempting this. I don't think this screen will work on an older 8-bit board. It's easy to tell if you have a 32-bit motherboard before you start disassembling the printer. If it has an older mini-USB connector, it has an 8-bit card. If it has a Micro USB connector, it's the 4.2.x series. Also, you should know if you have a version 4.2.7 motherboard as the printer is virtually silent during operation and the only noise comes from the fans running on the device. You can check which version it is by removing the bottom cover and looking at the motherboard. It is printed on the motherboard.