Review on 🚀 High-Performance AUTOSAVER88 2PACK 12W LED Spot POD Race Lights: Off Road Motorcycle Dirt Bike Fog Driving Work Lights with 1200LM & IP68 Waterproof Rating by Justin Goff

Relatively strong aggregates. I'm not sure if it's 1200 lumens. I bought them for the front of my tractor. The rain would hit them and I wanted to make sure they lasted so I did what any good engineer would do, I took them apart immediately. :) 3 nickel plated Allen screws hold the front lens in place. This front cover presses a flat, clear lens onto an opaque silicone gasket and black flashlight body. There is another focusing lens above the LED. That turns him from a limelight to a limelight. When you need flow, simply remove this plastic lens. The LED board is screwed directly to the case, which is good for pressure dissipation. I noticed that no sealant was used, so I decided to flood the PCB with sealant for added moisture protection. For this purpose I used Hysol two-part clear epoxy. In one of my shots you can see that the circuit board is shiny. This is a potting compound after curing. I angled it so the connection pools where the wires enter the case so it seals better too. I probably overdid it by topping it up and I love it. The hardware is not bad. I think it comes with the right hardware for the price. If you file the screws, nothing that is needed by the fittings will move. The exit is best described as two decent flashlights side by side. By decent I mean if you go to a Walmart flashlight stand and buy a $10 flashlight. That's two of them.