Review on 🔑 Pack of 2 Keyless Entry Remote Control Fobs with Uncut Blank Ignition Car Key Remote Start for CWTWB1U793 by KeylessOption by Chris Burks

For 2017 Ford Expedition XLT. Cut the keys at a local locksmith, the cost to cut was $20 a key, hardware stores didn't do this. Ignition key activated with the two original keys still working, inserted the first original key, turned on for 3 seconds, turned off and unplugged, repeated with the second original key, then inserted the new key and turned on for a few seconds which allowed the new key to start the ignition (autostart ) activated, but not for the remote control FOB. The locks worked and let me know everything went well. For the FOB remote activation I put one of the original keys in the ignition, turned it from the off position (I think the lock) to the on position and back 8 times, which was pretty quick. , left in the on position for the 8th time. This was supposed to put him in remote programming mode, but nothing happened. After a few tries I gave up for today. Tried again next time, still didn't work, but then I tried one of the new keys and it worked (the door locks at the end were dragging like an indicator). I then immediately pressed a button on each of the remotes and they were all ready to use. In order for the remote start button to work I had to enable some things via forscan (enabled remote start option in BdyCM and IPC modules). Apparently all Expeditions now come with the Remote Launcher installed. Once this was completed the remotes started to work, I have to press the lock button first and then slowly 2X press the center button twice. It took a bit of research to understand all of this, hopefully it will be helpful to someone else.