Review on 🚗 Enhance your Ford F-Series Clutch Performance with Orion Motor Tech Clutch Pedal Fix for 1987-1998 Models by Kendro Givens

The idea of this product is good, but be aware that there are a few things you need to know first.1. Guide #2. If your clutch pushrod has a plastic end installed, the end of it will break off and you'll be stuck. Install it on all metal push rods only. If your cylinder is plastic, you will need to purchase a new all-metal master cylinder. They are hard to find.3. You must make any modifications to the pushrod while leaving it attached to the master cylinder. Unscrew the master cylinder and slide it through the firewall, leaving it attached. Attempting to remove the push rod from the master cylinder is difficult and can damage it.4. Make sure the overall length of the pusher is at least 1/16 inch longer than the original. If you don't, this new connection will hit the neutral/safety switch and break it. For a slightly longer bar you will need 5. If you want to make it comfortable and discreet you will have to remove the front seat. You must make this change. It is possible, just follow my instructions. Much luck.