Review on 🔐 MING 2 Pack Cabinet Hinge - Frameless, 175 Degree Concealed Hinge with Adjustable Hydraulic Installation and Soft Closing Function - Full Coverage by Jim Young

I recommend this product for the price. Note that the hardware does not offer a soft close and you could pinch your finger when closing the bezel. One downside is that the mounting holes are only available for the vertical edge of the cabinet. Horizontal edge #1 has no mounting holes and flexes slightly when opening and closing the case bezels. I suspect that over time the 2 vertical mounting screws will become the weakest point and may damage the mounting edge of the case. Screw #2 is easily adjustable to limit hardware hinge opening. I just marked with a felt tip pen and adjusted accordingly for each side. Example: 5 turns on the left loop, using the marker marker as a guide, then I will adjust the opposite loops accordingly. The hinges are strong and snap, so be careful. The tray that came with the hardware is good, but it didn't have any screws/mounting hardware. I only used 1/4" small cap screws to slide the trays in and out for cleaning. I recommend securing the cabinet bezel in the fully open position with a #2 hinge screw. Plan the look of the cabinet's front panel when closed. When all the screws are in place there is no more room to adjust the horizontal position. First screw in 1 screw and check that the panel closes properly, then insert the remaining screws and tighten securely.