The product arrived very quickly which is great. Unfortunately I had several problems. First, only the overall design leaves something to be desired. To press out the ball joint, the screw goes up. So unless you have a very large wheel arch, you're going to have problems. Second, it doesn't come with pressure-side shims. The instructions clearly state not to use impact so I grabbed a half inch head and as I pushed out the top ball joint the c-clip started to flex with just the ball joint. half came out. I was afraid it would break so I removed the kit and used a sled to completely remove the U-joint. As you can see in the picture, I'm working on the lower ball joint and the flex is already very noticeable. The quality is so poor that if I'm lucky enough to get all four ball joints out I'll probably have to throw them away. I prefer to borrow the tool from the local auto parts store. For reference, this is a Dana 44 front axle.
π§ Efficient Steering Neck Bearing Race Remover: OTC 4796 for Fast Removal
9 Review
π§ OEMTOOLS 27308 Ball Joint Separator: Adjustable from 1-1/8" to 2-1/8", Perfect for Common Ball Joint Sizes, Enhanced Steel Separator Mechanism with Black Oxide Pins
9 Review
OEMTOOLS 24429 Ford 3-Valve Spring Compressor: Efficient Tool for Ford Valve Spring Compression
9 Review
π§ Astro Pneumatic Tool 7865: Ball Joint Service Tool + 4WD Adapters
8 Review
Bit and socket set Stels Tool set, 1/2", 1/4", CrV, plastic case 94 pcs, Stels, 94 pcs, black
46 Review
Xiaomi Mijia Ratchet Screwdriver 16 in 1 Screwdriver with Interchangeable Bits, 10 pcs, Black
22 Review
Rechargeable screwdriver OA-3,6F (433.0.2.00), 3.6 V, 1.3 Ah Li-ion, blister
46 Review
DVR 70MAI Dash Cam Pro Plus+, black (A500S), black
87 Review