Review on 🔥 High-Quality Fuel Pump E3500M for Chevy Pickup Silverado GMC Sierra 1999-2004 4.3L-8.1L w/ Sending Unit & Fuel Pressure Sensor by Josh Sharp

Updated 01/24/20 This pump has been running flawlessly for almost five months now. As I said in my original review, it's easy to see that this is a well-made piece. I'm so glad I didn't pay too much for a reservoir pump! (Original review) This fuel pump looks as good as anything I've seen and I've seen quite a few. The only issue I had was matching the wiring harness, but after checking the wire color coding online I was able to figure it out. Tip: If you have a pickup truck, it may be easier to raise the body than lower it. Tank. There are videos on YouTube describing that there are four screws on each frame rail on each side of the bed. First disconnect the fuel tank filler neck from the gas valve opening. Then completely loosen the 4 screws on the driver's side and almost (but not completely) loosen the screws on the right side of the bed. Cut 2 or 3 pieces 2" x 4" about 16" long. Have a friend help you lift and support the driver's side by attaching one of the 2x4 wheels between the bottom of the bed and the frame. You'll find that you may need to trim the 2"x4" a bit to get them wedged securely, but once you secure them with one it will be easier for you to figure out how long the others should be.After you Removed the fuel pump from the top of the fuel tank, wash any loose dirt off of it first!You don't want dirt getting into the fuel tank.Then follow the pump replacement instructions that came with the pump.