Review on 🔌 BeltandRoad Dual Beam Headlight Splitter Harness Adapter: Enhance HD Road Glide Street Glide with H4 Splitter for Dual Beam Headlights H4 to H9/H11 by Micheal Wolf

This review is for the splitter harness adapter only. I'm using it on a 2014 VRod Muscle to replace the stock headlight with a JWSpeaker unit. The standard headlight has two bulbs with H9 connectors and the JW speaker comes with H4 connectors, this harness pairs flawlessly with two. Just a tip: To avoid blowing the fuses, DO NOT connect both connectors from the bike to the wiring harness when running the setup. Take the low beam connector and align the black (negative) wires, connect it first, check if the low beam works, if not, rotate the connection, check again. Paying attention to the wire color orientation, disconnect the low beam connector. Now go to the high beam connector and follow the same steps as for the low beam. Once the high beam works, turn off the bike and reconnect the low beam, noting the wire color alignment beforehand. Turn the bike back on and your low and high beam headlights should work properly.