Review on Enhanced Capacity Electric Wheelbarrow by LANDWORKS: A Reliable Accessory for All Your Needs by Chad Judex

Two issues otherwise ok. I'll only point out these two issues as other reviews talk about using it. The 4 bolts in the frame holding the support bracket are the same bolts that came with the car and were reused in this build and are too short due to the extra thickness of the support bracket. The bolts just about reach the stop area of the nylock nuts and are about 3 turns past what they should be (you can look inside the nut and see the hole, not the bolt sticking out). The manufacturer had to either supply longer replacement bolts or use longer bolts with the bogie in anticipation that people would buy the accessory. A cheaper solution would be to supply thin nylock nuts with this accessory, which allow the threads of the bolt to lock fully onto the end of the nylock nut. I have to keep an eye on them to see if they come loose and I can buy the right length screws. If they become loose, it will affect not only this accessory, but also the integrity of the cart and may cause other frame damage.2. Another review mentioned this issue and it is a serious issue. When using the cart reset feature, this accessory will hinder full tilt by hitting the bottom of the basket and twisting/twisting the cross frame member. I removed the pivot pin, post and ball and left the rest of the build in place. This way I avoid stressing the trolley frame and basket every time I unload. Now I have to keep the ball somewhere where I won't forget it. Another reviewer suggested trimming the post and that would work too and the build would stay in place. The manufacturer must make these changes.