Review on 📷 HOHEM iSteady Pro4 Three-Axis Stabilizer by Ahmad ᠌

1) A small screw-on tripod (tripod), not wide enough and stable enough, cannot cope against the wind. the center of gravity is high in this design. 2) the rear display of the camera partially covers the mount of the steadic and is slightly inconvenient to use 3) if the camera is installed in the standard position (on button on the left / shutter on the top right), then it cannot be put on charge. the charge connector on the right and insert the cable interferes with the part of the mount with the motor. And if the camera is turned over, then the charge connector is available, but you cannot turn on the camera with the power button. 4) there is not enough function for the central button - holding the direction while clamping, regardless of the mode, there is only a double tap - return to the center of the camera and one press - sports mode. 5) there is no function by pressing (for example, the trigger could be washed down, for example, by triple pressing) turn the camera towards you, by 180 degrees, because steadics are often used for vlogging, and this function is not here. 6) well, you can only put the action camera of the "brick" form factor, there are no other types of attachment.