Review on 🔧 Ultimate Garage Power Tool Organizer: Drill Charging Station with Wall Mount Cordless Power Drill Holder, Screwdriver Rack, and Drill Bit Storage by Jeremy Romero

Cons: The instructions should better show where the pieces are that are offset on one side and flush on the other. The screws must be at least 1/4 inch longer. The included screws work well for pre-drilled holes, but are too short to use glue. Each drill holder bushing can be at least 1/8 inch wider. Clear, smooth, lacquered, finger-jointed pine is light and strong, holds glue well. The pre-drilled countersunk screw holes are well aligned and hide the screw heads well. Easy and fun to assemble. tips. Thread the screws through the countersunk sides until they protrude 1/16" from the opposite sides to help align with the pre-drilled holes, then dry install all connections first. Next, apply a thin bead of wood glue to one side of all joints, then use a cordless drill on a low clutch setting to seat the screws, then hand-tighten with a #2 Phillips screwdriver to squeeze out the glue a little .