Review on 🚪 Efficient and Secure National N235291 Closed Holder Doors - Enhancing Your Space by Jeremy Jackz

First of all because some of them had problems, this is for a bar! I wouldn't buy two of them. For your best installation option, you will need to purchase another item along with this one. open. Here is a link for it. Stanley National Hardware SP15BC Open Bar Holder, Galvanized You must plan the installation as close to the door handle/bolt as possible without interfering with the door hinge. Check both sides of the door whether you are entering a stud, brick or concrete wall and be prepared to drill 1/4" lag studs/screws as close to the door as possible. You may need to build up the material. to get the right 2x4 fit. A "proper seat" 2x4 should slide as close to the door as possible. If there is more than 1/4 inch clearance between the door and the 2x4, prepare to set up the 2x4 or change the hardware mount. Once everything is set and the 2x4 fits and trimmed, you can make hardware changes as shown. Take a 1/4"2" screw and put it in the drilled hole. You technically only need one on the open pole, but I chose both. taken out of the smaller window. Will it put off someone very determined to get in. Possibly, but they'll make a fuss so everyone in your home knows a burglary is occurring and give them enough time to call the police for help.