Review on 🚰 White Square Kraus KE1US21GWH 21-Inch Undermount Porcelain Enameled Steel Single Bowl Kitchen Sink with Pintura by Sergey Chodavarapu

This was mounted on a 7/16 inch thick oak countertop that I made from sawn oak. I made this for the kitchen sink in our 5 wheel trailer, replacing VERY cheap plastic. a sink attached to the underside of the countertop and pulled out of the original pressed cardboard countertop. There wasn't enough room to install it under the countertop - the guides on the 5th wheel severely limit the width of the sink, and while the sink did fit, the bottom of the sink brackets did not. So I installed the sink on the countertop with the flange resting on the countertop. The cutout was a bit large - about 1/4 inch spacing so keep an eye on the size of the template, but the sink fitted just fine. I used silicone glue to attach the sink to the countertop. As long as it holds up well and with a stainless steel flange on the countertop, I don't expect the sink to fall off the countertop while owning a trailer. very nice, VERY deep, and I opted for a shorter sink which I bought for $15 so I didn't have to modify the original plumbing. Not as pretty as the original but looks ok.