Review on N.P Hydrogen Water Bottle Generator: Advanced PEM and SPE Technology, Up to 1500PPB, Portable Hydrogen Water Maker - Black by Rebecca Stokes

Received a few days ago. Unpacked, read the instructions, started. works perfectly. Unlike some of these devices that seem to have very cryptic instructions that are poorly written, the instructions for this device are clear and easy to understand. The most important thing to remember about these devices is: DO NOT close them tightly when they are in use. This will ensure that water will come out as the device produces O2, O3 and H2. Likewise. Not overcrowded. There is a fill mark on the glass bottle. what = 8 ounces of water. The second most important thing to remember is to make sure you are using the device in a well ventilated area as it emits both O and H. Some of the O will be in the form of O3, which is harmful to the lungs when inhaled in large amounts. Personally, I work with mine with the top cover resting lightly on the unit and the unit resting on my stovetop while a fan runs removing O2 and O3 from your home while the unit is running. O2 and 03 you say. what to do with it? this should generate H2 in the water. FACT: The device produces H2 by electrolyzing water in a container. You can't get H2 without also getting O2 and some O3. This is chemically impossible. So. Follow the instructions carefully and be sure to vent and remove the O2/O3 after the device has shut down. O3 is easy to spot through the nose as it has a slightly pungent electrical smell. The third most important thing is to use good quality bottled water, NO distilled water and NO tap water. Distilled water is great for rinsing and cleaning the device, but it hinders electrolysis because the water doesn't contain any impurities that help the process. Tap water is bad because chlorine is released from the water during electrolysis. which is more toxic than any O3 formed. I personally use bottled natural spring water (brand doesn't matter). The last thing that is important is not to forget, as indicated in the instructions. and do 4-5 cycles, adding water at the end. This process activates and optimizes the operation of the components responsible for electrolysis. This will also ensure that you remove any hidden impurities from the manufacturing process. HOW CAN YOU SAY IT WORKS? Light. When it works, small bubbles will be blown through the water from below, and some of them will come out. The supplier recommends running two cycles with good quality spring water to end up with 2ppm H2 in the water. However, to confirm your actual H2 level, you'll need an H2 water test kit (available from Revain for $25-$30). WHAT WATER IS DELICIOUS: Different taste buds define it differently, but I find the water I use to be sweeter. and "wetter" after 2 unit cycles. It tastes very similar to fresh artesian water, fresh from the well, and tastes significantly smoother, sweeter, and wetter than the same water from the same bottle before processing. better than H2 tablets, cheaper and actually a joy to watch your water being converted into hydrogen enriched water by the device.