Review on BATODA - Heavy Duty Floating Shelf Bracket (8 pcs) - Solid Steel Blind Shelf Supports - Hidden Brackets for Floating Wood Shelves - Screws and Wall Plugs Included - Large Size by Jeremy Bradford

These were for the women's surf shop in San Clemente. , (4) 4' L x 12' W birch plywood shelves with floating body. I used 3/4" plywood, glued and nailed the '2' studs together so they are 1-1/2" thick, then I attached these heavy duty brackets which, once secured to the log wall, can be pulled up! It's amazing and doesn't bend at all. Wedge anchor bolts 5/16 are used! 4 things. on the shackle is very clever, because if a bolt doesn't grip properly, you still have a chance, because the shackles have 2 holes on each side. Then just drill with a long I think 5/16" bit and then I used a flat end router to cut out the back of the shelf where the screws and bracket are so the shelves will touch the wall then use You simply 1- 1 clean pine./2" doorstop to close the edges is glued, nailed and simply caulked with vinyl adhesive applied from shelves to wall. ‼️ Ok, I'm done. 😉👍👍👍