Review on 🖥️ Phanteks Enthoo Pro 2 Full Tower – High-Performance Fabric Mesh, Tempered Glass, Dual System/PSU Support, Massive Storage, Digital-RGB Lighting, Black by James Pfettscher

Whether you want to build a dual system or a power-hungry system with two power supplies, this case has room for everything. Possibility to install up to 5 radiators. Depending on the layout, there is enough room for 360mm on the top, 480mm on the side, 480 or 420mm in the front, 360mm on the bottom (240mm if you are using a dual system or power supply) and 120/140mm inches. Rear with fans in push or pull configuration. If you want to modify your case and install heatsinks on the outside, you can mount a 420 on top and put all your fans on push-pull. The cable routing is really nice. Excellent use of space and placement of attachment points. Structure of a 3-loop system - CPU 1 loop - 2xD5 work one after the other up to 480 on the side and 240 on the bottom. Cycle 2 GPUs - 2x D5 running in parallel with multiple cards, then chained to 3rd D5 and through 2x420. Circuit 3 RAM/M2s - 2xD5 working in series to drive RAM in parallel and M2 drives through 140 on the back. Fans in push-pull configuration. Overall quality is good, but the thumbscrews were over-tightened and difficult to engage when reinstalling. These can be better, but they can be a lot worse. A great case for any big build out of the box and a case modder's dream.