Review on 🔥 HDFL005 High-Performance Fuel Lines by Goodridge by Danny Zapata

Mounted on Electra Glide EFI "97". Removing the old lines and tank took longer than installing these new lines. Overall, the lines look good and are well made. My kit comes with "TIP" o-rings installed 1) First attach the fuel lines to the EFI throttle body 2) Replace the old factory snap rings with new ones 3) Remove the snap rings from the tank side fitting and disconnect hose from fitting (JIC fittings included with fuel tank) 4) Install new fittings into tank. Use some clean engine oil to lubricate the O-ring and threads. 5) Do not tighten the fittings until you have connected the hoses. to the connections, again use some clean engine oil to facilitate the installation. 6) After the fittings have spent a few turns in the tank and the lines are re-attached, reinsert and tighten the locking rings. By disconnecting the hose from the tank-side fitting you don't risk twisting the fitting/tank plug. The hose is crimped at both ends of the fittings. Definitely recommend to a friend.