I was very happy to get them and set up various configurations successfully, but sometimes my stack fell apart and I didn't know why. I eventually realized that the magnet on one of the terminals wasn't a magnet, or if it ever was, it was completely de-energized, for lack of a better term. So one of the 4 terminals is defective. EDIT: Turns out it's my fault. I didn't know that the magnet loses its magnetic ability when the clamp is heated. Don't forget to remove the clips after you're done pinning the pieces. Lesson learned!
Hakko T18-BR02 Soldering Tip - T18 Series for Hakko FX-888/FX-8801 - Conical Shape - Bent 30 Degrees - R0.2 mm x 10.5 mm
12 Review
π₯ Whizzotech Solder Wire 60/40 Tin/Lead with Flux Rosin Core - 0.032 Inch Diameter for Electrical Soldering (4oz/100g/0.22lb)
13 Review
Inverter welding machine CET CET MMA 200A, MMA
23 Review
Hakko 599B 02 Wire Type Soldering Cleaner
11 Review