Review on 🏋️ Gymboss Charge Interval Timer with Stopwatch Functionality by Joshua Mccall

INSTRUCTIONS: The initial setup took significantly longer than it should have had the instructions complete (the online instructions are in English) dated 15th October would be , 2021). For example, the second page shows a drawing of the standard interval timer screen without explaining what each of the five items shown is. Two of them look like they represent the time in three digits and say "1:00", but is it hours and minutes or minutes and seconds, and if the latter why not four digits? Here are some guidelines to help you set it: The top right corner shows: The length of the first interval in minutes and seconds, and if you hold the UP button while setting the length, the fourth digit becomes instant displayed on the left. from what was originally visible. The lower right corner shows: the duration of the second interval. Bottom center shows: Seconds the alarm will sound. The lower left corner shows: the number of repetitions that the timer has to go through. beep and whether to activate the vibrating alarm. OPERATIONAL REASON: When calculating the interval, everything works as expected until the beep at the end of the session (e.g. after three repetitions of two intervals). It then makes an incessant beep, despite whatever you try to do with the start button to stop it. This is because the device is internally programmed to turn itself off by pressing and holding the "Setting" button for three seconds - unlike hundreds of other electronic devices.