Review on 🌬️ NBJINGYI 6" 1200lbs Dual Trailer Swirl Jack Caster Wheel: The Ultimate Solution for Easy Trailer Maneuvering on Soft Ground by Jesse Nell

I have a manual jack shown in the attached photos. My trailer frame is attached to my Ford Escape low to the ground. I had two problems with this roller: first, the wheel was too tall to fit under the trailer frame, and second, the roller's leg was too narrow to slide over my jack tube. Some reviews said the tube was too big. The wheel I received was 2 inches with no clearance. There is a screw to tighten the tube after inserting the roller. I laughed at the turnbuckle because I couldn't get the jack tube in. Considerations for purchasing this wheel roller: 1 - you are 17 inches from the top of your trailer frame to the ground, giving you enough room to insert the roller when your trailer is coupled to your vehicle, and 2 - your hitch pipe is 2 inches or just over 2 cm? For these reasons I had to send this wheelset back. The impeller is of good quality. I really like the double wheels with a support in the middle. I had an earlier single bike that had the frame bent over the wheel. Then I bought a second single bike. The wheel can be seen in the photo next to my jack. Somehow the second wheel was bent at the top of the roller tube bushing so I couldn't get it into the jack. So now I'm looking for a third wheel with a 2 1/4 insert.