Review on 🌡️ Mishimoto MMRAD-G35-03 Performance Aluminum Radiator for Infiniti G35 2003-2007: Enhanced Cooling and Durability by Zane Myers

As with the other two reviews you will need to take your old rubber feet (part number: 21508-10V00) and cut them off at the top. Here's something else I found: basically everything doesn't fit this cooler anymore. - The radiator is thicker than the original, so the condenser is pushed forward more - After installing the condenser into the radiator grooves on the radiator, the condenser and radiator openings do not match. The capacitor holes are raised too high - the top heatsink latches on the core mount are too high to fit the heatsink latches, thinner latch bushings had to be used to lock the heatsink in place. - The OEM fan shroud holes do not align properly with the heatsink when attempting to install the heatsink fan shroud onto the heatsink. I had to drill plastic screw holes on the fan shroud about an inch deeper to mount the screws so I could mount the shroud to the heatsink. So this is NOT a direct landing. I would choose another brand, KOYO or something more "DIRECT MATCH". The OEM isn't worth it ($750 for the door for theft) that was the only reason I went with this one at half price.